IP55 Fixed Drone Detection Device With Rapid Deployment And Automatic Calibration

Fixed Drone Detector With Rapid Deployment And Automatic Calibration For Immediate Operation

Introduction

Fixed Drone Detector With Rapid Deployment And Automatic Calibration For Immediate Operation is a fixed drone detector with rapid deployment and auto-calibration that requires no training and is ready for immediate use, a highly portable, easy-to-operate safety and security device designed for advanced anti-drone activities. Equipped with multi-frequency strike capabilities, it provides detailed drone reconnaissance and identification while eliminating potential unknown threats, ensuring a critical role in a wide range of activities requiring privacy.

Parameters

Specifics

1. Detection range: In an interference-free environment, signal reception range maybe vary when different antennas are used. the range of detection can up to 10km. 
2. Detection spectrum bandwidth: 70 MHZ - 6GHZ, focus on the 433Mhz,900Mhz,2.4Ghz,5.2Ghz,5.8Ghz；[NOTE: Hobit S1 Pro+ can be customize with 1.0Ghz -1.4Ghz &5.1Ghz – 5.9Ghz FPV Bands]
3. Drone location: Locate drones and controller real time, capture home pointof the parts of DJI drone within 3 km
4. Identify Range: LightBridgel, LightBridge2, Ocusync, WIFI and WIFI variant protocols, Zigbee, Bluetooth and other customized protocal of small brand, can identify UAV brands and models;
5. The trajectory: have the function for tracking flight trajectory.
6. Accurate recognition: it can accurately identify UAV model and electronic fingerprints (ID),≧ 400 different uavs models and the corresponding ID (identity) can be identify at the same time.
7. Detection Angle: 360 °
8. Detection number of UAV : ≧150pcs
9. The lowest detection height: ≤0 meters
10. Detection rate: ≧99.9%

Operations Modes

1) Detect mode

 Click DETN to enter the detection page, when a drone is detected. The screen will display the current UAV model and frequency band;

2) STRIKE mode:

 Select STRIKE in to the jamming page. After selecting the jamming mode, press the button on the handle and the jamming system will work, jamming the drones within range.