High Precision Guide Rod Cylinder Grey Guided Cylinder 30mm 50mm
100mm Stroke
SEXGL Linear cylinder is a kind of pneumatic actuator that converts
the pressure energy of compressed air into linear mechanical
energy, which is widely used in industrial automation, machinery
manufacturing, robotics and other fields.
The linear cylinder drives the piston to perform a linear
reciprocating motion in the cylinder barrel through compressed air,
which converts the air pressure energy into mechanical energy.
1.Micron-Level Linear Accuracy: Employing a combination of C7
rolled ball screws and high-precision guide rails, coupled with a
closed-loop servo control system, it achieves a linear motion
accuracy error of ±0.02mm, surpassing 30% of similar industry
products. The ball screw pair undergoes ultra-precision heat
treatment and surface hardening, enhancing rigidity by 40% to
ensure no backlash or vibration during repeat positioning, meeting
the stringent trajectory accuracy requirements in scenarios such as
chip packaging and precision inspection.
2.Low Anti-Rotation Deviation Control: The innovative double guide
rod anti-rotation structure and crossed roller bearing set strictly
control the output shaft anti-rotation angle within 0.1°,
effectively suppressing deflection torque caused by lateral loads.
Even in vertical installation or eccentric load scenarios, it
maintains high consistency of the motion axis, making it
particularly suitable for automated equipment requiring multi-angle
precision positioning.
3.High-Rigidity Lateral Force Resistance: The body adopts a
high-strength aluminum alloy one-piece frame, combined with
thickened bearing blocks and a rigid support structure, achieving a
maximum lateral force resistance of 100kgf (dynamic load)—an
improvement of 50% compared to traditional screw cylinders. It can
directly withstand complex working conditions such as transverse
pushing and inclined loads without additional anti-rotation
brackets, simplifying equipment design complexity.
| EG20 |
|
|
|
|
|
| Standard motor output (W) | 50W | Stepper 28 |
| Rated torque(Nm) | 0.16 | 0.09 |
| Screw grade | C7 Rolling 0802(Slenderness ratio 1:50) |
| Repeatable positioning accuracy(mm) | ±0.02 |
| Screw specification | 802/805 |
| Max thrust (N) | 400 | 160 | 220 | 88 |
| Max speed(mm/s) | 100 | 250 | 40 | 100 |
| Stroke (mm) | 30.50.100 |
| Horizontal | 8 |
| Max load(KG) | Vertical | 8 |
| Piston rod rotation angle | ±0.7 degree |
| The body weight of Omm stroke(KG) | 1.9 |
| Weight added per 10mm(KG) | 0.13 |
| The component weight of direct installation motor(KG) | 0.14 |
| The component weight of indirect installation motor(KG) | 0.18 |
| Magnetic switch | CS1-H-1M | Contact type reed switch,wire length 1m |
| CS1-HN-3M | Contactless transistor NPN type,wire length 3m |
| CS1-HP-3M | Contactless transistor PNP type,wire length 3m |
