Hongxin Polygonal Galvanized 450Mpa Steel 90FT 100FT Power Transmission Steel Poles

Hongxin Polygonal Galvanized 450Mpa Steel 90FT 100FT Power Transmission Steel Poles

Specifications:

Type: Buried Type

Shape: Polygonal

Segment: Two or Three Segments

Material: ASTM A572 GR65

Direct China Steel Pole Factory: Yixing Hongxin Illumination Facilites Co.,Ltd.

Over 25 Years History! 30 Million RMB Registered Capital! 15000 Square Meters!

Advanced Machines! Experienced Engineers! Skilled Workers!

Specialized in Manufacturing Hot Dip Galvanizing Steel Poles!

Production Capacity Over 1000 Tons Per Month!

Material

Raw material of general-purpose steel GB/T1591-2008, Q255, Q355, Q420, Q460 used in China.

Manufacturing Process

Our factory owns advanced production lines and machines including two bending calibration machines, hydraulic plate shearing machine, cutting machine, slitting machine, two gas welding machines, hydraulic straightener, etc. All insure us to produce steel poles with best quality.

Finshed Products

Our factory has professional engineers to design the practical poles and save the cost for our clients. But to design the poles, normally we need customer to provide us some parameters as follows :

- Pole Top Design Load

- Safety Factor

- Pole type with Direct Buried Type or Flanged Bolted type

- Steel Pole Shape

- Steel Material required

- Segments required

- and others we can further more discuss when we need.

Besides these Nea standard poles, our factory also produces 50FT-120FT Transmission poles, Steel Lighting Poles, Traffic Signal Poles, Substation Structures, Steel Crossarm, Steel Towers and other steel components.   

Inspection
To ensure the quality, we have professional engineers to inspect the poles during the manufacturing and before delivery.
We have Lab Test, Workload Test, Steel thickness Test, Galvanization thickness Test, etc.

Packing and Delivery

* We have different packing to meet your requirement.

1. No packing, just bare poles to be delivered directly. This is the most economic way.

2. Sack wrap.

3. Non-woven fabrics wrap.

* We normally use 40ft container and our Port limit weight for 40ft container is 26Ton.

* If poles are with flange or in order to avoid any scratch while delivery, we will use 40ft open top container, which is a bit more costive than the 40ft container.

*Delivery schedule is based on your quantity. Normally within 30 working days after receiving your deposit. If large quantity, then partial delivery is allowed.

FAQ