High Performance NOVEC 1230 Clean Agent Garage Fire Fighting System

NOVEC 1230 (FK-5-1-12) is an advanced clean gas fire extinguishing agent and is currently a highly regarded alternative to Halon fire extinguishing agent. It is a clear, colorless, slightly odorous and easily vaporized liquid at normal temperature and pressure. It is not a dangerous substance. After release, no residue is left. The pressure inside the storage tank is low, making transportation and storage very convenient and stable. Its main fire-extinguishing mechanism is to stop the combustion process by absorbing heat. At the same time, it has physical and chemical effects, which can rapidly lower the flame temperature and suppress the combustion chain reaction, thereby effectively extinguishing the fire. It has zero potential to damage the ozone layer, a retention period in the atmosphere of only five days, and an extremely low greenhouse effect potential value. It is a truly environmentally friendly fire extinguishing agent. The fire extinguishing concentration of NOVEC 1230Clean Agent is low and the safety margin is high. It is friendly to personnel and has low toxicity. Its NOAEL value is 10% and the LOAEL value is greater than 10%. It is safe and harmless to the human body at the designed concentration. In addition, it does not conduct electricity in either liquid or gaseous state and has excellent electrical insulation.
In the garage scenario, the NOVEC 1230 Clean Agent demonstrates unparalleled applicability and efficiency. Modern garages, especially areas where new energy vehicles are concentrated for parking, are confronted with multiple fire hazards such as battery thermal runaway, fuel leakage and electrical short circuits. Although traditional water-based or dry powder fire extinguishing methods can control fires, they can cause secondary damage to vehicles, charging piles and other equipment, and the cleaning of water stains and dust is time-consuming and labor-intensive. The NOVEC 1230Clean Agent is deeply linked with the smoke, temperature and combustible gas detectors in the garage through the total flood fire extinguishing system. Once an abnormal situation is detected, the system can be quickly activated within 5 seconds, and the NOVEC 1230Clean Agent quickly fills the entire protected area. Extinguish the initial fire within 10 seconds and effectively prevent the fire from spreading to adjacent vehicles or charging facilities.
 
 

Safety Measures:
 
After extinguishing the fire with NOVEC 1230Clean Agent, to ensure safety, the following measures need to be followed:
1. Ventilation and air exchange
After extinguishing the fire, the ventilation system should be activated immediately to reduce the concentration of NOVEC 1230 Clean Agent in the air. Ventilation and air exchange can ensure that personnel can safely enter the protected area after the fire is extinguished.

2. Check the fire extinguishing effect and equipment
Check if the fire source has been completely extinguished: Carefully inspect the fire scene to confirm that the fire source has been completely extinguished, with no remaining sparks or smoldering phenomena.
Inspect the fire extinguishing equipment: Check whether the NOVEC 1230 fire extinguishing equipment is working properly, including nozzles, pipes, valves and control systems, etc. If there is any damage or malfunction, it should be repaired or replaced in time.
Inspect other equipment: Check other equipment in the building, such as the ventilation system, electrical equipment and fire alarm system, etc., to ensure their normal operation.

3. Clean the site
Remove residues: Although NOVEC 1230 does not leave solid or liquid residues after extinguishing a fire, in some cases, there may be smoke and dust produced by the fire. Appropriate cleaning methods should be used to remove these residues.
Clean the surface of the equipment: Clean the surface of the equipment to ensure its normal operation.

4. Assess the fire damage
Assess equipment damage: Evaluate the equipment damage caused by the fire, including electronic equipment, electrical systems and other critical equipment. Based on the assessment results, formulate a repair or replacement plan.
Assess data loss: In data centers or similar locations, evaluate the impact of fire on data. In case of data loss, the data recovery program should be initiated as soon as possible.

5. Safety training and emergency plan drills
Strengthen safety training: Provide safety training to employees to enhance their awareness of fire safety and emergency response capabilities.
Improve emergency response plans: Based on the fire situation, improve emergency response plans to enhance the ability to deal with future fires. Regularly organize emergency plan drills to ensure that employees are familiar with the emergency procedures.

6. Follow the guidance of professionals
Follow the guidance of the fire department, equipment manufacturers and professional firefighters to ensure that all safety measures are implemented.
 
 
 
Company profile:
 
Guangzhou Xinlin Fire Fighting Equipment Co., Ltd., established in 2017 with a registered capital of RMB 10 million, is a leading provider of advanced fire safety solutions headquartered in Dongzhou Industrial Park, Xintang Town, Zengcheng District, Guangzhou. Committed to innovation and reliability, the company specializes in state-of-the-art clean gas automatic fire extinguishing systems, including FM200(HFC-227ea),Novec1230,IG541 and IG100 systems, complemented by sophisticated gas fire alarm control panels.These products are widely adopted across diverse sectors, such as municipal infrastructure, power plants, telecommunications, healthcare facilities, and construction projects, thanks to their efficiency, safety, and environmental sustainability.
 
Supported by over 30 patents and a team with more than eight years of collective expertise in fire protection engineering, Xinlin Fire offers comprehensive services spanning system design, engineering, and seamless project execution. Operating from a modern 2398 - square - meter facility, Xinlin Fire integrates automated production lines and cutting - edge testing equipment to ensure consistent, high - quality output.
The company's production system has passed the dual certifications of the internationally authoritative SGS factory inspection certification and the German TÜV Rheinland factory inspection. At the same time, it has obtained ISO 9001 (Quality Management System), ISO 14001 (Environmental Management System), and ISO 45001 (Occupational Health and Safety Management System). Ensure that every link of the product from production to delivery complies with international standards. In addition, we also provide Chemical Data Sheets (MSDS) to comprehensively ensure the compliance and safety of product transportation, storage and use. Choosing us means choosing professionalism and trust.