FM200 Clean Agent HFC-227ea Fire Suppression System Residue-Free
and Non-Conductive Protecting Precision Equipment Technical parameter: No. | Product | Parameter | 1 | Brand | XinLin | 2 | Place of Origin | Guangzhou, Guangdong, China | 3 | Capacity | 1,1,1,2,3,3,3- Heptafluoropropane | 4 | Purity | 99.9%≥ | 5 | Solubility In Water | Negligible | 6 | Odor | Odorless | 7 | Composition | FM200/HFC-227ea | 8 | Applications | Precision equipment |
Description: FM200 (HFC-227ea) Clean Agent, as a new generation of clean fire
extinguishing agent specially designed for precision equipment,
redefines the high-end fire protection standard with its unique
chemical properties. Compared with traditional carbon dioxide (CO₂)
fire extinguishing agents, its core advantage directly targets the
pain points of protection for precision equipment: Double excellence in fire extinguishing efficiency and safety:
FM200 Clean Agent only requires a concentration of 8-10% to
suppress the combustion chain reaction within 10 seconds, while CO₂
needs to reach a concentration of more than 34%. The latter will
significantly reduce the environmental oxygen content (< 15%)
when extinguishing fires, which may pose a risk of oxygen
deficiency to equipment operation and maintenance personnel.
Especially in unattended precision equipment rooms, the
low-concentration and highly efficient fire extinguishing
characteristics of FM200 Clean Agent are even more irreplaceable. Zero residue and no damage features: After the FM200 automatic gas
fire extinguishing system displaces, it completely vaporizes
without any solid particles, liquid residue or condensate water,
causing no pollution to precision components such as circuit
boards, optical components and magnetic media. In contrast, when
CO₂ is used for fire extinguishing, it may cause a "cold shock
effect" due to low temperatures, leading to condensation on the
surface of the equipment or embrittlement of the solder joints. A
certain semiconductor factory's actual measurement shows that the
failure rate of precision instruments after CO₂ fire extinguishing
is as high as 25%, while the post-disaster failure rate of
equipment protected by the FM200 gas fire extinguishing system is
less than 1%. Non-conductive and compatible with live operation: The insulation
resistance of the FM200 gas fire extinguishing system is greater
than 10¹²Ω, which can be directly used to extinguish fires in live
equipment (such as running servers and photolithography machines),
avoiding data loss or process interruption caused by power failure.
Although CO₂ has insulating properties, high-pressure discharge may
cause aerodynamic shock to the equipment, resulting in component
displacement or interface loosening. Application: Protection of semiconductor and electronic manufacturing equipment In the lithography machine and deposition equipment areas of the
chip production line, the FM200 Clean Agent achieves nanoscale
protection through a total flooding fire extinguishing system: When a fire is caused by the failure of temperature control in the
photoresist storage cabinet, the concentration of FM200 Clean Agent
rises to the designed value within 6 seconds, suppressing the flame
while avoiding the carbonization of the photoresist and
contaminating the clean room. A case of a certain wafer fabrication
plant shows that after the EUV lithography machine area was
protected by the FM200 fire suppression system, the fire caused by
overheating of the laser optical path was successfully intercepted,
and assets worth more than 150 million US dollars for a single
device were preserved. The system can be linked with the process control system of the
equipment. When extinguishing a fire, it will automatically suspend
the operation of the vacuum chamber to prevent wafer damage caused
by sudden pressure changes, saving 72 hours of production capacity
recovery time compared with CO₂ fire extinguishing. 2. Protection of medical images and scientific research instruments In scenarios such as MRI rooms in hospitals and mass spectrometer
laboratories in scientific research institutions, the local
application systems of the FM200 Gas Suppression System demonstrate
unique value: Tube FM200 Automatic Fire Extinguisher is installed between MRI
superconducting magnets. When liquid helium leakage causes an
electrical short circuit, the agent can be precisely sprayed to the
fire source, preventing the magnets from being overexcited (which
would cost millions of dollars to re-excite). Data from a certain
tertiary hospital shows that after adopting this solution for its
3.0T MRI equipment, the fire response time was shortened to 8
seconds, which was 50% higher than that of the traditional CO₂
system. Company profile: Guangzhou Xinlin Fire Fighting Equipment Co., Ltd., established in
2017 with a registered capital of RMB 10 million, is a leading
provider of advanced fire safety solutions headquartered in
Dongzhou Industrial Park, Xintang Town, Zengcheng District,
Guangzhou. Committed to innovation and reliability, the company
specializes in state-of-the-art clean gas automatic fire
extinguishing systems, including FM200(HFC-227ea),Novec1230,IG541
and IG100 systems, complemented by sophisticated gas fire alarm
control panels.These products are widely adopted across diverse
sectors, such as municipal infrastructure, power plants,
telecommunications, healthcare facilities, and construction
projects, thanks to their efficiency, safety, and environmental
sustainability. Supported by over 30 patents and a team with more than eight years
of collective expertise in fire protection engineering, Xinlin Fire
offers comprehensive services spanning system design, engineering,
and seamless project execution. Operating from a modern 2398 -
square - meter facility, Xinlin Fire integrates automated
production lines and cutting - edge testing equipment to ensure
consistent, high - quality output. The company's production system has passed the dual certifications
of the internationally authoritative SGS factory inspection
certification and the German TÜV Rheinland factory inspection. At
the same time, it has obtained ISO 9001 (Quality Management
System), ISO 14001 (Environmental Management System), and ISO 45001
(Occupational Health and Safety Management System). Ensure that
every link of the product from production to delivery complies with
international standards. In addition, we also provide Chemical Data
Sheets (MSDS) to comprehensively ensure the compliance and safety
of product transportation, storage and use. Choosing us means
choosing professionalism and trust.
Frequently Asked Questions: Q1: Are you a manufacturer or a trading company? A1: We are a professional manufacturer specializing in gas fire
suppression systems. Q2: Can you give me a sample order? A2: Yes, of course you can. We welcome you to order samples to test
and check the product quality. Provide mixed samples.
Q3: Do you offer OEM products? A3: Yes, we welcome your own designs and drawings.
Q4: Where is your factory located? A4: Our factory is situated in the East Lake Industrial Park of
XinTang Town, Zengcheng District, Guangzhou City, Guangdong
Province, China.
Q5: How can I get to your factory? A5: Due to convenient transportation, you can reach us by taxi or
by subway. If taking the subway, please take Line 13 to Shacun
Station. Before disembarking, kindly inform us in advance, and we
will arrange for a comfortable business van to pick you up from
there.
|