Jietai Manual Ultrasonic Cleaning Machine (With Agitation And
Dust-Proof Exhaust Hood), Used In The Electronic Instruments And
Meters Industry. Multi-industry Adaptable Solutions, Unlocking New Cleaning
Scenarios - Typical Application Scenarios
- Jewelry: The 40kHz high-frequency + oscillation mode is used to
clean the dirt in the gaps of K gold jewelry. Combined with neutral
cleaning agents, it avoids surface scratches caused by traditional
brushes, and the glossiness is increased by 30% (meeting the
requirements of GB/T 11887-2020 standard).
- Electronic Maintenance: The 28kHz low-frequency mode is applied to
clean the residual flux on mobile phone motherboards. The
dust-proof cover effectively isolates the ionic pollution generated
during the cleaning process. After repair, the short-circuit rate
of the motherboards is reduced from 15% to 2%.
- Medical Devices: The oscillation function, combined with ultra-pure
water, is used to clean endoscopic components. The cleanliness rate
of the inner walls of blind holes reaches 99.2%, meeting the
requirements of WS 310.2-2016 Hospital Disinfection Supply
Standard.
- Considerate Service Guarantee
- Free Sample Testing: Customers provide 3 samples, and a Cleanliness Test Report (including particle size distribution and surface roughness
data) will be issued within 24 hours.
- Lifetime Technical Support: The Ultrasonic Cleaning Process Manual is included as standard. Online operation training is provided
(enabling quick mastery within 1 hour). Vulnerable parts
(transducers, sealing rings, filters) are delivered nationwide with
free shipping within 3 days.
- Low-power operation mode: Enters standby automatically after 15 minutes of idleness (power
consumption < 1W). The heating module uses PID intelligent
temperature control (30% energy savings), with the 6L model
consuming ≤0.3kWh per hour (25% less than similar devices).
|
