Redefining Industrial-Grade Cleaning Standards
Utilizes 28kHz±0.5% precise frequency control technology to
generate over 3 million cavitation bubbles per second, with an
impact force of up to 50MPa. This effectively peels off stubborn
dirt ≥5μm on metal surfaces. The bottom arc-shaped flow guide
groove design creates a 360° circulating eddy current in the
cleaning solution, eliminating the cleaning blind spots of
traditional flat tanks. For example, in cleaning automotive engine
fuel injectors, it can remove carbon deposits in 0.2mm internal
pores, improving cleanliness by 8 times compared to manual
brushing, meeting the VDA 19.1 level of ISO 16232-10 standards.
Both the machine body and cleaning tank are made of 3mm thick
SUS304 stainless steel (compliant with ASTM A240 standards), formed
through 12 bending and welding processes. The acid and alkali
corrosion resistance is 40% higher than ordinary stainless steel.
The bottom is equipped with anti-vibration and anti-slip foot pads
(Shore hardness 90A), combined with a 4mm rubber
vibration-isolation layer, ensuring operating noise ≤55dB and
vibration amplitude controlled within 0.3mm. It is suitable for
continuous operation in precision laboratories and high-frequency
industrial scenarios (e.g., 24-hour uninterrupted cleaning of
bearing workpieces).
Supports continuous power adjustment from 50-1500W (step precision
10W) to match different cleaning loads:
- Low-load mode (50-300W): For jewelry cleaning, pulsed power output (10ms interval) avoids
damage to precious metal surface coatings, with a gloss recovery
rate of 98%;
- High-load mode (500-1500W): For degreasing mechanical parts, combined with 60°C constant
temperature heating (temperature control precision ±2°C), the
solubility of mineral oil is tripled, and the daily processing
capacity of a single tank can exceed 800 pieces.
Mechanical Series | | | | | | | |
Model | Capacity | Ultrasonic power | Heating power | Cleaning tank size | Overall dimensions of the machine | Gross Weight | Large box size |
L | W | W | (LⅹwⅹH)mm | (LⅹwⅹH)mm | KG | (LⅹwⅹH)mm |
JPS-08 | 1.3L | 60 | 100 | 150×140×65 | 180×170×140 | 2.5 | 526×524×308(4Table) |
JPS-10 | 2L | 80 | 100 | 150x140x100 | 180x170x180 | 3.0 | 526×524×338(4Table) |
JPS-20 | 3L | 120 | 100 | 240x135x100 | 270x170x210 | 4.0 | 410×355×345(2Table) |
JPS-30 | 6L | 180 | 300 | 300x150x150 | 330x180x270 | 6.0 | 555×435×390(2Table) |
JPS-40 | 10L | 240 | 300 | 300x240x150 | 330x270x270 | 8.0 | 735×435×380(2Table) |
JPS-50 | 14L | 300 | 300 | 300×240×200 | 330×270×320 | 9.0 | 420×360×420(1Table) |
JPS-60 | 15L | 360 | 300 | 330×300×150 | 360×330×270 | 10.0 | 450×420×370(1Table) |
JPS-70 | 19L | 420 | 300 | 330×300×200 | 360×330×320 | 11.0 | 460×420×420(1Table) |
JPS-80 | 22L | 480 | 600 | 500×300×150 | 550×330×270 | 13.0 | 625×420×370(1Table) |
JPS-100 | 30L | 600 | 600 | 500×300×200 | 550×330×320 | 15.0 | 625×420×420(1Table) |