1 - 10 of 23
thermal conductivity tester plate method
Selling leads
|
Specification Scope of application Applicable to: thermal conductivity of dry specimens of clay and sand, and the thermal resistance of the specimen ...
2026-06-18 13:56:12
|
|
...thermal conductivity of dry clay and sandy soil specimens. The thermal resistance of the specimen should be greater than 0.1m ².k /W. The method of ...
2026-01-09 16:24:09
|
|
...thermal conductivity testing instrument for insulation materials developed based on the water flow flat plate method thermal conductivity tester. ...
2026-06-23 17:23:18
|
|
...thermal conductivity testing instrument for insulation materials developed based on the water flow flat plate method thermal conductivity tester. ...
2026-06-23 17:23:18
|
|
I. Overview This instrument is based on the principle of unidirectional stable heat conduction. When the upper and lower surfaces of the sample are at ...
2026-06-23 17:23:18
|
|
... grease, resins, rubber, ceramics, aluminum substrates and other materials, as well as the contact thermal resistance at solid interfaces and the ...
2026-03-04 15:12:40
|
|
Specification Scope of application: Applicable to: thermal conductivity of dry specimens of clay and sand, and the thermal resistance of the specimen ...
2026-06-18 11:21:19
|
|
Specification Product Description: The thermal conductivity and thermal resistance of clay and sand are detected by a heat flow meter, and the ...
2026-06-18 11:21:18
|
|
Product Introduction The radiation plate flame spread tester uses a gas thermal radiation plate to test the flammability of building surface materials ...
2026-06-17 09:18:42
|
|
...Tester for Thermal Insulation Materials Conform to the standard: In line with GB/T17430-1998 "Evaluation Method for the Maximum Service ...
2026-04-25 07:30:20
|