241 - 250 of 560
material testing resistance equipment
Selling leads
|
Equipment use: It is suitable for placing the test piece between the upper and lower compression plates of the machine, compressing 25% and staying ...
2025-12-18 02:01:24
|
|
...er specified conditions. The equipment casing is made of all SUS304 stainless steel The entire machine is composed of: test chamber, air source, ...
2026-01-09 16:24:09
|
|
...test the service life of winding wires. During testing, the specimen is subjected to continuous reciprocating stretching and contraction under ...
2026-01-06 10:16:04
|
|
...Test for Power Frequency Voltage Breakdown Strength and Voltage Endurance Strength meet the standard : GB/T 1408-2006 Test Method for Electrical ...
2026-06-17 09:18:33
|
|
...accurately measuring the indentation hardness of materials such as sponge and foam. It can also be used to measure the specified indentation ...
2026-06-17 09:18:35
|
|
... and apply a certain load. During the test, the fixture will swing left and right. After a certain number of times, check the breakage rate. Or ...
2026-06-18 13:56:04
|
|
...Equipment Application: This test chamber is mainly used to assess whether the enclosures and seals of electronic and electrical products can ensure ...
2026-06-24 09:56:54
|
|
...Testing Machine, Suitable for Thin-walled Low-voltage Cables Below DC 60V (AC 25V) for Automobile Specification Conform to the standard: meet the ...
2026-01-06 10:16:09
|
|
... and Smoke Testing Equipment Specification Reference standards: ASTME 84, UL910, NFPA262 and other test standards Product Introduction: UL910...
2026-01-06 10:16:10
|
|
... Temperature Humidity Cycling Chamber Electrical Stress Test System Multiple Stress Testing IEC62730-2024 Tester: 1. Test sample: Two test ...
2026-03-04 15:12:40
|