21 - 29 of 29
flammability testing equipment
Selling leads
|
The role of EN ISO 11925-2:2020 test in the European Classification System EN ISO 11925-2:2020 Ignitability of products subjected to direct impingemen...
2026-06-18 11:21:12
|
|
Testing principle Place the sample in a 30-kw diffusion flame. The combustion gas is collected by the exhaust hood for analysis. Through gas analysis, ...
2026-06-18 11:21:12
|
|
Main parameters Figra 0.2MJ - Combustion Growth Rate Index. The maximum value of the ratio of the heat release rate of the sample to the exposure time ...
2026-06-18 11:21:12
|
|
Main parameters Critical radiant flux CHF (kW/㎡) : The lowest value of either the radiant flux (CHF) at the point where the flame is extinguished or ...
2026-06-18 11:21:12
|
|
Overview In order to meet the requirements of production processes and energy conservation and emission reduction, improve working conditions, enhance ...
2026-06-18 11:21:11
|
|
Applicable scope: Suitable for testing flooring materials placed horizontally with small flames ignited under specified conditions and exposed to ...
2026-06-18 11:21:11
|
|
Standard Introduction JIS K 7201-3 specifies the method for determining the minimum oxygen concentration in a mixed gas of oxygen and nitrogen when ...
2026-06-18 11:21:11
|
|
Standard Introduction ISO 4589-2 (JIS K 7201-2) specifies the test for the minimum volume fraction of oxygen (oxygen index OI) in a mixture of oxygen ...
2026-06-18 11:21:11
|
|
Applicable scope: The combustion heat value tester for building materials is mainly suitable for testing the combustion heat value of building ...
2026-01-12 10:25:32
|