800g Synthetic Brake Dot3 Oxidation Resistant Formula For Extended Service Life

Synthetic Brake Fluid DOT3 Oxidation-resistant Formula For Extended Service Life

Function:

Manufactured using advanced technology and premium raw materials, this high-quality  synthetic brake fluid meets multiple international standards including:

• SAE J1703 specification from the Society of Automotive Engineers (U.S.)

• DOT3 classification under FMVSS No.116 (U.S. Federal Motor Vehicle Safety Standard).

• ISO 4925 international technical requirements.

• GB12981 HZY3 Chinese national standard for brake fluids.

Suitable for hydraulic brake systems in all domestic and imported vehicles.

Specification:

Product Advantages:

• Superior High-Temperature Performance-Boiling point exceeds DOT3 standards (typically >260°C dry / >140°C wet).
• Excellent Low-Temperature Fluidity-Stays flowable at -40°C (meets ISO 4925 cold viscosity requirements).
• Advanced Corrosion Protection-Passes SAE J1703 metal corrosion tests.
• Optimal Rubber Compatibility-Controls rubber swell within ±5% (per FMVSS No.116).
• Extended Service Life-Superior oxidation stability (2X longer life vs conventional fluids).

Usage Method:

1. Clean brake fluid reservoir cap thoroughly before opening.
2. Depressurize System - Pump brake pedal 20x with engine off.
3. Extract Old Fluid - Use baster to remove 90% of reservoir fluid.
4. Refill Reservoir - Add new fluid to "MAX" line.
5. Repeat at all wheels in sequence: RR → LR → RF → LF.
6. Inspect for leaks at all connection points.Road test at low speed first.

Precautions:

• Wear nitrile gloves and safety glasses.
• Immediately wash skin contact with soap/water.
• Dispose of used fluid at approved recycling center.
• Hot climates: Check reservoir level every 5,000km - higher evaporation rate.