Highly Efficient Car Paint Cleaner Non Flammable For Acrylics Polyurethanes

Faster Stripping Paint Remover Low - Odor For Acrylics Polyurethanes

Capability:

This product is an aerosol paint stripper, composed of a variety of fashionable solvents, with a light odor. It has a good removal effect on acrylic, polyurethane, electroplating paint and other coatings attached to the surface of metal alloys, and can solve the waste loss caused by coating errors in the production process.

Product Specifications:

Main Features:

• Multi-solvent blend penetrates: Acrylics, Polyurethanes, Electrophoretic paints
• 70% faster stripping vs. conventional removers
• Low-odor formulation (65% less VOCs)

• Non-flammable when properly stored

• Precision spray nozzle for controlled application

Steps Guide:

• Degrease with isopropyl alcohol (ASTM D2201 standard)

• Mask adjacent areas with 3M™ Fine Line Tape

• Test spray 10x10cm area

• Wait 5 min for substrate reaction check
• Shake vertically for 10 sec (critical for solvent activation)
• Spray at 20-30cm distance (45° angle recommended)
• Observe paint wrinkling (typically begins at 90 sec)
• For multilayer coatings: Reapply every 3 min (max 3 applications)
• Use brass brush for intricate geometries
• Neutralize with alkaline cleaner (pH 9-10) after stripping

Safety & Disposal:

• Skin contact: Flood with PEG-300 solution
• Eye exposure: Irrigate for 15min (EN166 standard)
• Inhalation: Immediate fresh air + medical monitoring
• Pierce empty can with approved depressurization tool
• Recycle steel canister (SEPA Category 4)
• Dispose residue as hazardous waste (UN1263)

• Butyl rubber gloves (0.11mm minimum)

• ANSI-approved splash goggles
• Organic vapor respirator (OV/AG rating)

Storage Conditions:

• Temperature: -5°C to 38°C
• Humidity: <60% RH
• Store upright with valve cap secured
• 2m minimum clearance from electrical panels