851 - 860 of 943
tunneling drill shank adaptor
Selling leads
|
... a very straight drill hole. • Steel inserts • Widely used in dimensional stone industry, drifting and tunneling Steel Cross Type Bit Cross Type ...
2024-12-09 11:05:07
|
|
... Tapered Cross Drill Bit For Mining With 7 11 12 Degrees Product Application 7/11/12 Degree 42mm Tapered Cutting Bit is suitable for mining...
2024-12-09 18:17:56
|
|
PRODUCT DESCRIPTION Chisel bit is mainly useed for hard rock, cross bit and buton bit are mainly used for fisuralrock tis mainy used for diging into ...
2025-11-21 16:50:54
|
|
... penetration rate but it produces a very straight drill hole. • Steel inserts • Widely used in dimensional stone industry, drifting and tunneling ...
2024-12-09 11:03:26
|
|
... bit with steel inserts using thread system. It has a slow penetration rate but it produces a very straight drill hole. • Steel inserts • Widely ...
2024-12-09 18:55:12
|
|
2026-05-01 00:02:52
|
|
5” DTH Hammer QL50 Top Sup Thread Connection 3 1/2" API Reg Pin With Foot Valve QL50 DTH Hammer Description: 5.0” Hammer QL50 Top Sup Thread ...
2026-05-01 00:02:53
|
|
...Drill rod using R25 thread system. With R32 on one shank end. Suited for short hole drilling operations. • R25 thread system • Suitable for small ...
2026-05-01 00:02:53
|
|
...Drill rod using R28 thread system. With R32 thread on one shank end. Suited for short hole drilling operations. • R28 thread system • Suitable for ...
2026-05-01 00:02:53
|
|
...Drill rod using R28 thread system. With R38 thread on one shank end. Suited for short hole drilling operations. • R28 thread system • Suitable for ...
2026-05-01 00:02:53
|