881 - 890 of 900
tungsten carbide thread button bit
Selling leads
|
... rod using R25 thread system. With R32 thread on one shank end. Suited for short hole drilling operations. • R28 thread system • Suitable for small ...
2024-12-09 10:43:16
|
|
...Thread Extension Drill Rod Description Drill rod using T38 thread system. In good rock conditions it will produce straighter holes and at least 10% ...
2026-07-31 00:08:35
|
|
... hole Dia.:85-305mm 4.Face type: drop center bit/concave face/convex face/double gauge face/flat face bit 5. Carbide button shape: domed/round ...
2026-07-31 00:08:35
|
|
...thread system. In good rock conditions it will produce straighter holes and at least 10% higher penetration rate compared to rod and coupling ...
2026-07-31 00:08:35
|
|
...-170mm Description Crossover coupling using R25 thread system . • R25 thread system • Widely used in drifting and tunneling Color: Green or Based ...
2026-07-31 00:08:35
|
|
Description Standard coupling using T51 thread system • T51 thread system • Widely used in drifting, tunneling, benching, and long hole drilling Color...
2026-07-31 00:08:35
|
|
Description Crossover coupling using R25 thread system . • R25 thread system • Widely used in drifting and tunneling Color: Green or Based on Customer ...
2026-07-31 00:08:35
|
|
Description Standard coupling using R28 thread system • R25 thread system • Widely used in drifting and tunneling Color: Green or Based on Customer ...
2026-07-31 00:08:35
|
|
... is in direct contact with the drill bit, little energy is lost. This gives DTH hammers a nearly constant penetration rate regardless of hole ...
2026-07-31 00:08:35
|
|
...bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little ...
2026-07-31 00:08:35
|