371 - 380 of 446
pr54r 140mm dth hammer
Selling leads|
...DTH Bits With Low Air Pressure In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. ...
2026-05-01 00:02:53
|
|
Description Our products are compatible with most of the products manufactured by , Atlas Copco, etc. DTH drill bits are widely used in mining, ...
2026-05-01 00:02:53
|
|
Product Description COPROD is a unique rock drilling system combining the greater penetration rate and lower fuel consumption of tophammer equipment ...
2026-05-01 00:02:53
|
|
...DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct ...
2026-05-01 00:02:53
|
|
...DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct ...
2026-05-01 00:02:53
|
|
QL80 Shank DTH Drill Bits CIR80 / CIR90 with Concave Face In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill ...
2026-05-01 00:02:53
|
|
Low Pressure Down The Hole Hammer CIR65 / 70 For Well Drilling Products Parameters: 1.high and low air pressure down-the-hole drill bits 2.Low air ...
2026-05-01 00:02:53
|
|
Drilling hole from 165 to 190mm DHD360 COP64 D65 6 inch Hammers For mining and construction FEATURES MIROC offers one of the most complete lines of ...
2026-05-01 00:02:53
|
|
Centre Sample Recovery 3.5"/4" Remet Or 4"Metzke RE004 RC Hammer Introduction of R.C. Drilling R.C.drilling, referred to as"Centre Sample Recovery”or" ...
2026-05-01 00:02:53
|
|
Product Description KSQ offers a complete line of Reverse Circulation hammers and spare parts, which can replace KSQ series Reverse Circulation ...
2026-05-01 00:02:53
|
