271 - 280 of 358
76mm flat face rock drill bit
Selling leads
|
... tungsten carbide inserts that is known to have high penetration rate, but has weak configuration against carbide fracture. • Widely used drifting ...
2024-12-09 18:22:59
|
|
...Drilling Tool Tapered Drill Rod For Mining Rock Drill Product Introduction: Tapered drill equipment also provides a hexagonal chuck section to ...
2024-12-09 18:36:59
|
|
...Drill Rod H19 H22 Shank Drill Steel Rod For Hand Held Rock Dril Tapered drill rod,another name called taper rod, tapered drill steels, This ...
2024-12-09 19:34:13
|
|
... leverage for the rotation chuck bushing. It usually has a forged collar to maintain the proper shank striking face position in the rock drill, and ...
2024-12-09 10:43:16
|
|
CIR80 CIR90 Low Air Pressure DTH Button Bits With Diameter 80mm 90mm 95mm DTH Button Bit Description: Name: DTH Button Bit Diameter: 90 mm Face design...
2026-05-01 00:02:53
|
|
DTH Bit shank identification chart QL 60 6 inch flat face DTH down the hole hammer drill bit HIGH AIR PRESSURE BIT(Common Use) DHD3.5 Dia(mm) Gauge ...
2026-05-01 00:02:53
|
|
Bit Adaptor Thread R32 - R35 With Female Thread R32 And Male Thread R35 Bit adaptors are male to female and used to adapt to a different thread than ...
2026-05-01 00:02:52
|
|
Description This type of bit is well known for its high wear resistance on medium-hard to hard abrasive rock formations (between 200 Mpa to 260 Mpa ...
2024-12-09 10:43:16
|
|
Description This type of bit is well known for its wear resistance on soft to medium-hard rock formations (between 55 Mpa to 165 Mpa compressive ...
2026-05-01 00:02:52
|
|
Description This type of bit is well known for its wear resistance on soft to medium-hard rock formations (between 55 Mpa to 165 Mpa compressive ...
2026-05-01 00:02:52
|