21 - 30 of 192
waterproof ingress protection test equipment
Selling leads
|
...ween the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm diameter shall not completely ...
2024-12-09 13:06:35
|
|
...Ingress Protection Test Equipment Support For Testing Product information: 1 pressure vessel: stainless steel tank, diameter 0.8 meter, height 1 ...
2024-12-09 11:18:09
|
|
...Ingress Protection Test Equipment Test Sphere Probe With Force Of 0-50N This probe is intended to verify protection of persons against access to ...
2024-12-09 13:06:50
|
|
... flow valve. The interchangeable nozzles assemble easily to the jet handle. The nozzles are made from stainless steel. Working principle: Working ...
2024-12-09 13:06:26
|
|
Electronic IEC Ingress Protection Test Equipment IPX5 IPX6 Hose Nozzle Test Device Product information: The HT IPX5/6 Handheld Jet Nozzle is designed ...
2024-12-09 10:54:33
|
|
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test ...
2024-12-09 13:07:58
|
|
...Ingress Protection Test Equipment Test Rod Probe D 1 mm diameter Standard:IEC61032 figure 4 and IEC60529 for IP4 and IEC60065. Standard description...
2024-12-09 13:08:07
|
|
...: IPX9K rain test chamber has a great effect on the aging of products, the fading of pigments and corrosion of metals, which make the aging test ...
2024-12-09 12:07:57
|
|
... there is a relevant product standard, the test conditions are subject to agreement between manufacturer and user, but they shall be more severe ...
2024-12-09 13:11:55
|
|
... is given in table 1 . Other IEC publications should refer to a test probe of this standard by means of its code (column 2) and short description ...
2024-12-09 13:28:15
|