21 - 30 of 238
water resistant ip testing equipment
Selling leads
|
... and dust environment, which can be used to test the performance and durability of products or materials in sand and dust environment. It is ...
2024-12-09 22:21:23
|
|
... access to hazardous parts for an IP1 Code. Also used to verify protection from access with the back of the hand for an IP suffix A code. It ...
2024-12-09 22:22:12
|
|
... test probe C and IEC60529 for IP3 and suffix C codes. It is used to verify the protection of persons against access to hazardous parts, also used ...
2024-12-09 22:22:38
|
|
IEC60529 IP Testing Equipment Test Probe D for IP4X 1mm Probe Product Introduction for IP Testing Equipment: The 1.0mm test rod conforms to IEC61032 ...
2024-12-09 22:22:38
|
|
...IP Test Equipment Product information: The Jet Nozzle IPX 5/6 Set, is used for the verification test of the degree of protection to the risk of ...
2024-12-09 13:14:00
|
|
Walk-in high and low temperature environment simulation laboratory Product Introduction: The walk-in high and low temperature environment simulation ...
2024-12-10 00:05:34
|
|
... resistance of various power cables and electrical conductors. Below is a table outlining its key parameters: Parameter Description Test Object ...
2025-08-02 00:02:08
|
|
IEC60529 IP2X Ingress Protection Test Equipment Test Finger Probe B Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, and ...
2024-12-09 13:07:58
|
|
...Water Tightness Pressure Tester HH0806 Description: Assessment of enclosures and sealing element whether can ensure good performance of equipment ...
2024-12-09 12:01:19
|
|
IP Testing Equipment IEC 60529 IPX8 Water Immersion Test 500mm Diameter Product introduction: The HC-IPX8 waterproof test device, created by the ...
2025-08-02 00:02:08
|