21 - 30 of 87
spring hammer impact testing machine
Selling leads
|
...the six energy values defined in Table 1 . For the purpose of these figures, the lengths of the striking element are calculated for vertical ...
2024-12-09 13:36:27
|
|
... of IEC60068-2-75 chat1and chat 2. When the striking element is released in a height, the corresponding impact energy can be produced. It can be ...
2024-12-09 10:47:48
|
|
...Hammer Test Apparatus Description: This device is intended to test the mechanical strength test of the shell of the electric appliance for house ...
2024-12-09 11:49:26
|
|
IEC60068-2-75 Test Ehc Vertical Hammer Electromagnet Release Tester Of 2J 5J 10J 20J 50J Product Introduction This device conforms to the standard ...
2024-12-09 12:42:42
|
|
...the enclosure in accordance with the standard requirements of the IEC598.1 and IEC60950.1. Two impact forms can be achieved through this apparatus. ...
2024-12-09 10:47:48
|
|
..., blows shall be applied to the enclosure to be tested. The test shall be done by using one of the test apparatus described in IEC 60068-2-75. The ...
2024-12-09 13:27:07
|
|
... metal, shell of Non metal electric energy metering cabinet, substation cable switchboard and cable junction box with vertical impact tester or ...
2024-12-09 11:49:26
|
|
...Test Apparatus Impact Testing Machine Product details: This testing device confirms to the standards of IEC60598.1 and IEC60950.1. It is applicable ...
2024-12-09 10:47:48
|
|
.... In this case, the impact face should be made of polyamide with a hardness as specified in Table 1 . Impact Testing Machine Figures A.2, A.3 and A...
2024-12-09 13:18:55
|
|
Charpy Impact Testing Machine This series of the charpy impact testers are designed and manufactured in accordance with the standard requirement of ...
2024-12-09 11:47:17
|