751 - 760 of 915
precise ip testing equipment
Selling leads
|
...' clause 23.2, figure 20 Application with Tensile Strength Testing Machine: It is used to test rewireable plugs and rewireable portable sockets, ...
2024-12-10 00:10:34
|
|
...-1:2009,IEC62262:2002 clause 6 and IEC60068-2-75, it applies to test the mechanical collision strength degree when the electrical equipment shells ...
2024-12-09 11:56:30
|
|
... ACCESS AREAS there is adequate protection against contact with bare parts of TNV - 1 , TNV - 2 and TNV - 3 CIRCUITS except that access is ...
2024-12-09 13:14:44
|
|
...Testing Machine Calibration System Product Overview The Spring Impact Hammer Calibration Device is a precision verification system designed for ...
2026-06-19 07:30:21
|
|
... for protection test on the lamps of household appliances. Test method: Using a sphere probe whose diameter is 75±0.5㎜ to touch the lamp which is ...
2024-12-09 10:47:48
|
|
...Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068...
2024-12-09 12:42:42
|
|
... hazardous mechanical parts. It is also used to verify the protection against access with a wire. Test probe D is also used to verify the ...
2024-12-09 13:15:41
|
|
...Test Finger Probe Probe length with 100±0.2 Product information of Test Finger Probe Probe: This testing probe is used for interlocking apparatus ...
2024-12-09 22:42:21
|
|
..., electrical performance, and motion analysis. It simultaneously performs high-precision time measurements on 6 main contacts and 6 auxiliary ...
2025-09-28 17:20:45
|
|
...Nylon, and the tip is stainless steel. Standard:UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). Application:It is used for the protection test of ...
2024-12-09 10:47:48
|