581 - 590 of 860
ingress protection testing equipment
Selling leads
|
... switches for display and control. The workpiece is manually placed, and a total of 2 workstations are designed. Each workstation tests 4 products ...
2024-12-09 19:05:45
|
|
... ACCESS AREAS there is adequate protection against contact with bare parts of TNV - 1 , TNV - 2 and TNV - 3 CIRCUITS except that access is ...
2024-12-09 13:14:44
|
|
..., and IEC60335-1 Clause 29 etc. They are used to determine the shortest path between two conductive parts, or between a conductive part and the ...
2024-12-09 12:31:11
|
|
... 29,IEC60335-2-9 clause 29,and IEC60335-1 Clause 29 etc. They are used to determine the shortest path between two conductive parts, or between a ...
2024-12-09 13:07:24
|
|
...Equipment Products Introduction The device is based on IEC60598-1 Luminaires –Part 1: General requirements and tests clause 4.13.4a), IEC60950-1 ...
2024-12-09 12:49:00
|
|
IEC60811-3-1 High Temperature Indentation Device Equipped With 30 PCS Weights IEC 60811-3-1 clause 8.2.3 Position of the test piece in the test ...
2024-12-09 17:22:10
|
|
... information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of ...
2024-12-09 10:47:48
|
|
... provided with pins intended to be introduced into fixed socket-outlets. Test sample: fixed socket-outlet, plug-in equipment Feature: Mechanical, ...
2024-12-09 12:31:11
|
|
...General requirements clause 24.17 and 24.18, figure 32. Application with IEC Test Equipment: It is used to check the contour line of the cover or ...
2024-12-09 23:18:32
|
|
... voltages up to and including 450/750 V) and IEC60245-2 (Test methods for rubber insulated cables with rated voltages up to and including 450/750 V...
2025-08-02 00:02:08
|