831 - 840 of 979
iec testing equipment
Selling leads
|
...IEC60335, IEC 60529. Application It is used with the testing probe for the convenience and correctness. In the two output electrodes, the low ...
2024-12-09 12:18:12
|
|
Test Apparatus For Compression Test For Plug Or Socket-Outlet Of IEC60884-1 Figure 8 Manual Operation Standard: IEC 60884-1 'Plugs and socket-outlets ...
2024-12-09 12:59:24
|
|
...Test - Hotplates dropping aluminum plate Standard: This device meets the standard of IEC 60335-2-6 clause 21.102 and IEC60335-2-9 clause 21.101...
2024-12-09 13:33:15
|
|
... requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed ...
2024-12-09 23:18:32
|
|
...-1 Figure 8 Purpose: Suitable for pressure testing of plugs to check whether the mechanical strength of the plug meets standard requirements. ...
2024-12-10 00:10:34
|
|
... for protection test on the lamps of household appliances. Test method: Using a sphere probe whose diameter is 75±0.5㎜ to touch the lamp which is ...
2024-12-09 10:47:48
|
|
...Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068...
2024-12-09 12:42:42
|
|
... hazardous mechanical parts. It is also used to verify the protection against access with a wire. Test probe D is also used to verify the ...
2024-12-09 13:15:41
|
|
...Nylon, and the tip is stainless steel. Standard:UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). Application:It is used for the protection test of ...
2024-12-09 10:47:48
|
|
... information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of ...
2024-12-09 10:47:48
|