21 - 30 of 88
iec 62368 jointed test probe
Selling leads
|
... on to the blade shall cover at least the smallest recommended blade-cutting edge zone. The space between the upper guard and the blade shall be ...
2024-12-09 17:08:26
|
|
IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre...
2024-12-09 13:32:06
|
|
...Test Finger Probe Telecom Test Probe End radius with R6 Product presentation of Test Finger Probe: The Telecom Test Probe is a precision tool ...
2024-12-09 22:42:21
|
|
... test probe C and IEC60529 for IP3 and suffix C codes. It is used to verify the protection of persons against access to hazardous parts, also used ...
2024-12-09 22:22:38
|
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
... the children who are younger than 36 months to test whether the hazardous parts can be touched. Test sample: Easily accessible enclosure live ...
2024-12-09 12:31:11
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|
|
...verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or ...
2024-12-09 12:31:11
|
|
... finger specified in IEC 60529. The finger is pressed against the surface with a force of 30 N. During the test, metal parts shall not touch live ...
2024-12-09 13:18:46
|
|
... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. ...
2024-12-09 13:00:26
|