101 - 110 of 121
iec 60529 test sphere probe
Selling leads
|
IEC 60065:2014 clause 9.1.1.3 Children Test Probe 18 Standard: Conforms to IEC 60065:2014 clause 9.1.1.3, IEC61032 figure 12 finger probe 18, IEC335.1...
2024-12-09 12:31:11
|
|
...ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti-electric ...
2025-08-03 20:00:20
|
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|
|
...Test Equipment Ingress Protection Test Chamber Product Introduction IPX1/2, IPX3/4 waterproof degrees test equipment are designed and manufactured ...
2024-12-09 12:19:47
|
|
...Testing System Introduction IPX1to IPX9K waterproof degrees ingress protection test system is designed and setup according to IEC 60529 < Degrees ...
2024-12-09 12:19:47
|
|
...second characteristic numeral 1 & 2 with drip box. For assessing the protection against vertically falling water drops. Feature of IP Testing ...
2025-08-04 00:02:00
|
|
...Testing Equipment R800 Oscillating Tube Standard of IP Testing Equipment: IEC 60529: 2013 Degrees of protection provided by enclosures (IP Code) ...
2025-08-04 00:01:59
|
|
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test ...
2024-12-09 13:07:58
|
|
...Test Equipment Product information: The Jet Nozzle IPX 5/6 Set, is used for the verification test of the degree of protection to the risk of water ...
2024-12-09 13:14:00
|
|
... as specified in 1 4.2.1 adjusted to provide the water flow rate specified in table 8. The table on which the enclosure is placed does not turn as ...
2025-08-04 00:01:59
|