151 - 160 of 160
iec61032 test finger probe
Selling leads
|
...ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti-electric ...
2025-07-26 20:00:12
|
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
...IEC60335, IEC 60529. Application It is used with the testing probe for the convenience and correctness. In the two output electrodes, the low ...
2024-12-09 12:18:12
|
|
...,IEC60335 and IEC60598. As required in the standards, it is used to test the mechanical integrity of product enclosures. After applying the impact ...
2024-12-09 10:47:48
|
|
.... As required in the standards, it is used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the ...
2024-12-09 10:47:48
|
|
...Test Equipment Plug Socket Switch Breaking Capacity Normal Operation This series covers all of complete test equipment and system for dimensions, ...
2024-12-09 11:18:09
|
|
...test conforms to the standard requirements of IEC60068-2-63,IEC60068-2-75,IEC60335 and IEC60598. As required in the standards, it is used to test ...
2024-12-09 10:47:48
|
|
...correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the ...
2024-12-09 10:47:48
|