51 - 60 of 193
iec60950 test finger probe
Selling leads
|
... for IP4 and IEC60065. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify ...
2024-12-09 10:47:48
|
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2024-12-09 10:47:48
|
|
... to test whether the live parts inside can be touched. The HT-I21 test probe with 1N force is for testing whether the live parts with the ...
2024-12-09 10:47:48
|
|
... to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon while the finger is made of ...
2024-12-09 10:47:48
|
|
... for protection test on the lamps of household appliances. Test method: Using a sphere probe whose diameter is 75±0.5㎜ to touch the lamp which is ...
2024-12-09 10:47:48
|
|
...Probe UL1310 Fig.16.4 Product details: It conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to ...
2024-12-09 10:47:48
|
|
....1108/260/CD for paper shredders. It is used to test whether the hazardous parts of shredder can be touched by people. The probe is electrically ...
2024-12-09 10:47:48
|
|
Cone Probe Conform to the UL1278 Fig 10.1 UL Test Probe Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The ...
2024-12-09 10:47:48
|
|
... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where ...
2024-12-09 10:47:48
|
|
...Test Probe 17 Test Wire Product information: The test wire confirms to the IEC61032 figure 11 test wire 17 standard requirements. It is used to ...
2024-12-09 10:47:48
|