51 - 60 of 77
iec60950 1 impact testing equipment
Selling leads
|
IEC60950-1 Annex AA Mandrel Test Device With Three 50N weights IEC60950-1 Annex AA Three test samples, each individual sample consisting of three or ...
2024-12-09 17:07:01
|
|
IEC60950-1 Test Pin For Information Technology Equipment Test , Tip Diameter 3mm IEC60950-1 clause 2.1.1.1 Access to energized parts c) A test with ...
2024-12-09 17:22:10
|
|
... information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of ...
2024-12-09 10:47:48
|
|
IEC60950-1 Hot Wire Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be ...
2024-12-09 13:51:51
|
|
... ACCESS AREAS there is adequate protection against contact with bare parts of TNV - 1 , TNV - 2 and TNV - 3 CIRCUITS except that access is ...
2024-12-09 13:14:44
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|
|
...Test Instrument HX9801 Standard: Confirm to IEC60065:2014 clause 10.4.2 and figure 6, IEC60950 Safety of information technology equipment, UL1310 ...
2024-12-09 12:31:11
|
|
... provided with pins intended to be introduced into fixed socket-outlets. Test sample: fixed socket-outlet, plug-in equipment Feature: Mechanical, ...
2024-12-09 12:31:11
|
|
... of handlamps. This device should be mounted on a solid wall vertically of brick, stone, concrete or similar material. This is a manual apparatus. ...
2025-07-13 20:01:29
|
|
...Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068...
2024-12-09 12:42:42
|