491 - 500 of 845
iec60811 cable testing equipment
Selling leads
|
Automatic Cord Reels Endurance Tester Product information: The device is used to detect automatic cord reels, and it conforms to IEC60335-1 clause 22...
2024-12-09 10:47:48
|
|
Screwed Glands Tester Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall ...
2024-12-09 10:47:48
|
|
IEC60811-3-1 High Temperature Indentation Device With 90° And 120° Sector-Shaped Profile IEC 60811-3-1 clause 8.1.3 Position of each test piece in ...
2024-12-09 17:07:01
|
|
... of circular cross-section having an external diameter up to and including 12.5 mm and for sector-shaped cores when it is not possible to prepare ...
2024-12-09 17:12:04
|
|
...Testing Device For Checking The Impact Resistance At Low Temperature Test Apparatus Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, ...
2024-12-09 12:13:47
|
|
... is realized in an oven with natural air flow or air flow by pressure. The air shall enter the oven in such a way that it flows over the surface of ...
2024-12-09 17:08:42
|
|
...the ultimate guardian of cable safety performance, designed to simulate high-frequency bending and current load impact in real use scenarios. It is ...
2025-07-26 00:02:06
|
|
... voltages up to and including 450/750 V) and IEC60245-2 (Test methods for rubber insulated cables with rated voltages up to and including 450/750 V...
2025-07-26 00:02:07
|
|
...Cable Wire High Temperature Pressure Test device Product details: The test equipment is designed and manufactured according to standard VDE0472, GB...
2024-12-09 10:52:23
|
|
...Test Apparatus Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire ...
2024-12-09 10:47:48
|