131 - 140 of 147
high temperature flammability testing device
Selling leads
|
... of an insulating material from an electrically heated wire is described in the Method for Glow-Wire Ignitability Test on Materials, IEC 695-2-1 /3...
2024-12-09 17:30:39
|
|
...device is a precision device designed for testing the combustion performance of materials. It can simulate the combustion conditions in the real ...
2026-06-28 00:16:36
|
|
Glow-Wire Tester Product Introduction This device is manufactured according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the ...
2024-12-09 12:34:29
|
|
IEC60695-compliant 220V/50Hz Horizontal and Vertical Flame Tester with 50W and 500W Power Options This device is an IEC60695 horizontal and vertical ...
2026-06-28 00:16:36
|
|
IEC60695-2-13 Glow Wire Tester With Ф4mm ± 0.04mm Glowing Filament The Standard describes a glow-wire ignition temperature test method for materials. ...
2024-12-09 13:51:51
|
|
...ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti-electric ...
2025-08-13 11:51:01
|
|
...device is used to check switch of the toasters, and conform to the IEc60335-2-9 clause 19.101.Toasters are operated at rated power input and under ...
2024-12-09 10:55:33
|
|
...Testing Device IEC60320-1 Product Information: The coupler heating device is designed and manufactured according to the IEC60320-1,clause 18.2 ...
2024-12-09 10:54:02
|
|
...2008 Application: This device is used for testing the performance of electric water heater when out of the factory. Tests are including performance ...
2024-12-09 12:07:22
|
|
...Device In Hot Conditions Standard:Confirm to the IEC60320-1, clause 18.2 figure13 standard requirement. Application:It is used for testing the heat ...
2024-12-09 11:59:42
|