161 - 170 of 179
figure 38 lab test equipment
Selling leads
|
...testing equipment of Lateral Strain for socket-outlets with 5N weight Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device ...
2024-12-09 19:00:19
|
|
IEC60065 Figure 11 Socket-outlet Torque Balance Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is ...
2024-12-09 10:47:48
|
|
...figure 35. Verification of groove hole and reverse taper gauge Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – ...
2024-12-09 13:00:26
|
|
...Figure 37 Product details: The Ball Pressure Tester conforms to many standard requirements like IEC884-1, IEC950 and so on. It is used for testing ...
2024-12-09 11:18:09
|
|
...Testing Rotating Spits , Testing Rotating Spits Load Product information: The testing rotating spits load complies with IEC60335-2-9 102, GB4706-14 ...
2024-12-09 10:47:48
|
|
...figure 11 and so on . It is used to test the strain force of insertion. A device provided with pins intended to be introduced into fixed socket...
2024-12-09 12:13:47
|
IEC 60529 Diameter 12.5mm Rigid Sphere Probe With Force Of 10N-50N IP First Characteristic Numeral 2
|
...figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify the degree of protection of enclosures against ingress of solid foreign ...
2024-12-09 13:51:51
|
|
... clause 8.6.6.2 and Figure 1. It is used to check the mechanical strength of handlamps. This device should be mounted on a solid wall vertically of ...
2025-07-22 20:00:22
|
|
IEC60811-3-1 High Temperature Indentation Device With 90° And 120° Sector-Shaped Profile IEC 60811-3-1 clause 8.1.3 Position of each test piece in ...
2024-12-09 17:07:01
|
|
...and Annex A, Figure 8. This standardization ensures the reliability and comparability of test results obtained using this equipment. Application ...
2025-07-23 00:02:27
|