121 - 130 of 143
figure 21 flexibility test apparatus
Selling leads
|
...Testing Equipment For Iron Mechanical Strength Test with rate 20 drops per min Standard of Home Appliance Testing Equipment: IEC 60335-2-3 ...
2025-07-16 00:02:34
|
|
IEC 60335-1Figure 8 Supply Cord Against Excessive Flexing Testing Apparatus Product Introduction: The supply cord flexibility performance tester is ...
2024-12-09 11:29:30
|
|
...21.101 Current-Carrying Hoses Crushing Resistance Tester 1.5kN Standard: This device meets the standard of IEC60335-2-2, clause 21.101. Electrical ...
2025-07-16 00:02:33
|
|
Apparatus For Breaking Capacity And Normal Operation Test For Plugs And Socket-Outlets Standard: IEC 60884-1 'Plugs and socket-outlets for household ...
2024-12-09 12:58:58
|
|
...test piece in the test apparatus The indentation device is shown in Figure 1, and consists of a rectangular blade with an edge 0.70 ± 0.01 mm wide, ...
2024-12-09 17:07:01
|
|
...nd annex A requirements, used for testing the controller marking durability performance. The apparatus comply with the dimensions requirements of ...
2024-12-09 12:51:21
|
|
...apparatus adheres to the standards set in IEC 60730 - 1:2015, specifically the General requirements clause 7.4 and Annex A, Figure 8. This ...
2025-07-16 00:02:34
|
|
... clause 8.6.6.2 and Figure 1. It is used to check the mechanical strength of handlamps. This device should be mounted on a solid wall vertically of ...
2025-07-15 20:00:15
|
|
... as specified in Sub-clause 8.1.3 and shown in Figure 1. The strips shall be supported by a metal pin or tube, which may be halved in the direction ...
2024-12-09 17:22:10
|
|
... of the insulation material. It has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round pins, or a blade ...
2024-12-09 10:47:48
|