381 - 390 of 464
compression test device
Selling leads
|
...test device is designed and manufactured according to IEC60065:2014 clause 8.3, 8.17 a) and c), 10.3, 13.7, 14.2 and etc., 10.3 IEC60068-2, ...
2024-12-09 12:33:32
|
|
... Introduction: Compliance with Standard: The device adheres to IEC 60884 - 1 'Plugs and socket - outlets for household and similar purposes – Part ...
2025-03-11 21:21:58
|
|
...Test Equipment Hi-pot (Voltage Withstand) Tester 5kv/10kv 1000VA Standard: IEC 60669.1 clause 16, IEC 60884-1 2013 clause 17 Application: This ...
2024-12-09 13:05:30
|
|
... is used for test the firmness of the plug wire and electrical accessories. Test sample: Non-rewirable plug and socket-outlet, rewirable plug and ...
2024-12-09 12:13:47
|
|
... system is a device used to detect gas leaks in automotive parts or other equipment. It usually consists of four sealed test boxes and correspondin...
2024-12-09 19:05:45
|
Four Chambers Hydrogen And Nitrogen Leak Detection System For Automobile Air Conditioning Compressor
|
... used to detect gas leaks in automotive parts or other equipment. It usually consists of four sealed test boxes and corresponding detection devices...
2024-12-09 23:55:57
|
|
... Testing Device Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the ...
2024-12-09 10:47:48
|
|
...device is a precision device designed for testing the combustion performance of materials. It can simulate the combustion conditions in the real ...
2025-08-03 00:02:03
|
|
... hammer. It is the special equipment for the laboratory. Because it is difficult to measure directly for the offered energy of the calibrated ...
2024-12-09 10:47:48
|
|
...Testing Device IEC60320-1 Product Information: The coupler heating device is designed and manufactured according to the IEC60320-1,clause 18.2 ...
2024-12-09 10:54:02
|