331 - 340 of 372
cable testing secureness apparatus
Selling leads
|
IEC60811-3-1 High Temperature Indentation Device Equipped With 30 PCS Weights IEC 60811-3-1 clause 8.2.3 Position of the test piece in the test ...
2024-12-09 17:22:10
|
|
... tests — Pressure test at high temperature for insulation and sheaths, IEC 60811-3-1 figure1. Application: For PVC insulated and sheathed wire and ...
2024-12-09 13:03:42
|
|
...test arrangement and guidance Application This part of IEC60695 specifies a needle-flame test to simulate the effect of a small flame which may ...
2024-12-09 12:18:03
|
|
.... The equipment complies with relevant international standards and can be used for flammability testing of electrical and electronic products, ...
2025-01-08 16:44:33
|
|
... to check the mechanical strength of handlamps. This device should be mounted on a solid wall vertically of brick, stone, concrete or similar ...
2025-07-15 20:00:15
|
|
...apparatus adheres to the standards set in IEC 60730 - 1:2015, specifically the General requirements clause 7.4 and Annex A, Figure 8. This ...
2025-07-16 00:02:34
|
|
... force. Matched with electronic pull tester, it can test instant value and maximum value. Technical parameters with Customized Products: Standard ...
2025-05-13 19:26:52
|
|
... and IPX4, IEC 60884-1, IEC 60335-1, IEC 60598-1. Application: It is used for the testing of IPX3 and IPX4. Test sample: The test apparatus with ...
2024-12-09 13:02:11
|
|
... 8 and annex A requirements, used for testing the controller marking durability performance. The apparatus comply with the dimensions requirements ...
2024-12-09 11:10:17
|
|
...nd annex A requirements, used for testing the controller marking durability performance. The apparatus comply with the dimensions requirements of ...
2024-12-09 12:51:21
|