51 - 60 of 128
6mm diameter test finger probe
Selling leads
|
...IEC60335-2-14 requirement. Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the ...
2024-12-09 10:47:48
|
|
...IEC60335-2-14 requirement. Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the ...
2024-12-09 10:47:48
|
|
...Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884...
2024-12-09 10:47:48
|
|
... for IP4 and IEC60065. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify ...
2024-12-09 10:47:48
|
|
... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access ...
2024-12-09 10:47:48
|
|
IEC60884-1 Figure 9 and Figure 10 Test Probe With Force Introduction: These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10...
2024-12-09 10:47:48
|
|
... to hazardous moving parts such as access to fan blades through a fan finger guard. The handle is made of nylon while the finger is made of ...
2024-12-09 10:47:48
|
|
...Probe UL1310 Fig.16.4 Product details: It conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to ...
2024-12-09 10:47:48
|
|
Wedge Probe for Testing Document Shredders Product details: The wedge probe is a new accessibility probe required by the standard of IEC 60950-1 Fig ...
2024-12-09 10:47:48
|
|
Cone Probe Conform to the UL1278 Fig 10.1 UL Test Probe Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The ...
2024-12-09 10:47:48
|