51 - 60 of 166
30n test probe
Selling leads
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|
|
... figure 8.4. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection ...
2024-12-09 10:47:48
|
|
IEC61032 Figure 17 Test Bar 43 Product information: This test bar 43 confirms to the IEC61032 figure 17 and IEC60335 standard requirements. It is used ...
2024-12-09 10:47:48
|
|
...the IEC61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules ...
2024-12-09 13:39:37
|
|
...Test Finger Probe Test Finger Probe B With Force Of 10N , 20N , 30N Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, ...
2024-12-09 13:07:16
|
|
IEC 60335-1 Test Finger Probe For Test Nails The maximum applied pressure is 30N Product description of Test Finger Probe: 1. The test nails are made ...
2024-12-09 22:42:21
|
|
... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. ...
2024-12-09 13:00:26
|
|
...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 ...
2024-12-09 17:40:48
|
|
...Test Finger Probe 75mm±5mm Spheroid Probe Test Standard of Test Finger Probe: IEC60335-2-24 This test probe conforms to IEC60335-2-24 Clause 21.102...
2024-12-09 22:42:21
|