321 - 330 of 342
220v flammability testing apparatus
Selling leads
|
Glow-Wire Tester Product Introduction This device is manufactured according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the ...
2024-12-09 12:34:29
|
|
IEC 60112 solid insulating materials, IEC 60695 leakage tracking tester Standard: IEC 60112, IEC60695 and etc product introduction The test machine is ...
2024-12-09 13:00:26
|
|
IEC60695-2-13 Glow Wire Tester With Ф4mm ± 0.04mm Glowing Filament The Standard describes a glow-wire ignition temperature test method for materials. ...
2024-12-09 13:51:51
|
|
... 6-20R configuration used for the conductor insertion and retention test and the conductor push-in test are to be tested through this test apparatus...
2024-12-09 12:06:19
|
|
...test arrangement and guidance Application This part of IEC60695 specifies a needle-flame test to simulate the effect of a small flame which may ...
2024-12-09 12:18:03
|
|
...test apparatus is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which is used to process the bending ...
2024-12-09 12:34:39
|
|
... socket-outlets and plugs with pins which are not solid, by means of an appropriate test apparatus. During the test, no sustained arcing shall ...
2024-12-09 13:06:35
|
|
...Durability Test Equipment Product information The test apparatus is designed and manufactured according to IEC60884-1, IEC61058-1, IEC60669...
2024-12-09 10:53:46
|
|
...apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause ...
2024-12-09 12:33:59
|
|
... and tests clause 4.13.4a), IEC60950-1 Part 1: General requirements clause 4.2.5, IEC60065-1 Audio, video and similar electronic apparatus –Safety ...
2024-12-09 12:49:00
|