11 - 20 of 21
1j spring operated impact hammer
Selling leads
|
Vertical Impact Hammer IEC 60068-2-75 Merchanical Strength Testing Equipment Technical parameters: Power supply: 220V / 50Hz. Lift stroke: 400-13500mm...
2024-12-09 11:12:06
|
|
... 60068-2-75; IEC 60068-2-63. Test Impact test Impact energy 0.14; 0.2; 0.35; 0.5; 0.7; 1.0J Model single energy or multi energy Impact element mass ...
2024-12-09 11:49:57
|
|
... Device for Spring operated impact hammers Its design and manufactured according to the test requirements of IEC 60068-2-63 Annex A, IEC 60068-2-75 ...
2024-12-09 11:49:26
|
|
... of the six energy values defined in Table 1 . For the purpose of these figures, the lengths of the striking element are calculated for vertical ...
2024-12-09 19:17:18
|
|
... and IEC60068-2-75.This spring hammer is available to test the impact resistance of the electronic and electrical products, as an indispensable ...
2024-12-09 11:18:09
|
|
... element and the release system. The body comprises the housing, the guide for the striking element, the release mechanism and all rigidly fixed ...
2024-12-09 13:14:00
|
|
.... As required in the standards, it is used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the ...
2024-12-09 10:47:48
|
|
... hammer. It is the special equipment for the laboratory. Because it is difficult to measure directly for the offered energy of the calibrated ...
2024-12-09 10:47:48
|
|
...,IEC60335 and IEC60598. As required in the standards, it is used to test the mechanical integrity of product enclosures. After applying the impact ...
2024-12-09 10:47:48
|
|
...requirements for hammers, clause 17 and figure 103 Application: This apparatus is applicable to durability test for hand held motor operated ...
2025-07-13 00:02:12
|