601 - 610 of 1344 Selling leads
|
IEC60335-2-6 clause 21.102 Vessel For Dropping Test - Hotplates dropping aluminum plate Standard: This device meets the standard of IEC 60335-2-6 ...
2024-12-09 13:33:15
|
|
IEC60335-2-6 Figure 102 Vessel For Hotplates Test - Steel Vessels - Thickness 2±0.5mm Standard: This device meets the standard of IEC60335-2-9 clause ...
2024-12-09 13:33:15
|
|
IEC 60669-1 Load Bank, Plug Socket Tester, 220V 50Hz Single station Standard: IEC 60669-1, IEC 60884-1 2013 clause 20 and 21, IEC 60950-1, IEC 60598-1...
2024-12-09 13:32:59
|
|
UL507 Probe for Film-coated Wire ELECTRIC FANS TEST 101.6mm length 19.05mm Diameter Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts ...
2024-12-09 13:32:59
|
|
ISO 20653 Test Finger Probe Test Probe 2 - 12.5mm steel ball Tolerance 0.05mm Standard:ISO 20653, IEC61032 figure 6 probe 2,IEC60529 of IP2. ...
2024-12-09 13:32:59
|
|
IEC60529 IP2 Ingress Protection Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first ...
2024-12-09 13:32:59
|
|
IEC 60065 Test Probe D 1mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065 Clause 9.1 .4 TERMINALS The use of a single-pole plug or a bare wire ...
2024-12-09 13:32:59
|
|
IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre...
2024-12-09 13:32:06
|
|
UL1278 Figure 8.4 Articulate Probe Test Probe B - Verify Accessibility of Live Parts Product information: An electrical part of a heater shall be so ...
2024-12-09 13:31:30
|
|
Diameter 50mm Test Probe A Made Of Stainless Steel And Nylon, Accord With IEC60529 IP1 Product introduction: This probe made of stainless steel and ...
2024-12-09 13:31:30
|