Iso 9906-Compliant Dual-Station Pump Comprehensive Performance Test
System Pc + Plc/Dcs Integrated Control Product Introduction
WPT-11 Dual-station Pump Comprehensive Performance Test System is
committed to providing a one-stop, efficient pump performance
verification solution. - Product Description: The WPT-11 system is an advanced pump
comprehensive performance test equipment. Its core advantage lies
in the innovative dual-station design, which allows two pumps to be
tested in parallel, greatly shortening the test cycle. The system
is equipped with high-precision sensors that can measure the key
performance parameters of the pump under different operating
conditions in real time and accurately, and display, analyze and
generate reports through an intuitive software interface. The
rugged and durable structural design and user-friendly operation
interface make it a powerful tool for daily testing and in-depth
performance analysis.
- Product Use: WWPT-11 is widely used in pump R&D design
verification, production line product quality control, new product
type testing, factory performance acceptance testing, and teaching
and research in scientific research institutions. It helps users
comprehensively evaluate the hydraulic performance, mechanical
performance and operating stability of the pump, ensure that the
product meets the design requirements and international standards,
thereby improving product competitiveness and reducing after-sales
risks.
Product highlights - Double-station parallel testing, double efficiency: The original
double-station design can test two water pumps at the same time,
greatly improving the test efficiency and shortening the product
launch cycle.
- High-precision data acquisition, reliable results: The
industry-leading high-precision flowmeter, pressure sensor, torque
sensor, etc. are used to ensure the accuracy and repeatability of
all test data.
- Automated intelligent control, easy operation: Equipped with
advanced PLC/industrial computer control system, the test process
is automated, from parameter setting to data collection and report
generation, one-click completion, reducing the difficulty of
operation.
- Comprehensive performance analysis, optimized design: Provide
detailed water pump performance curves (Q-H, Q-P, Q-η, Q-NPSH),
efficiency maps and cavitation characteristics analysis, providing
a scientific basis for product optimization and improvement.
- Comply with international standards and globally recognized: The
system design and test methods strictly follow international
authoritative standards such as ISO 9906 to ensure the
international applicability and authority of the test results.
- Modular design, flexible configuration: The system supports
customized configuration and can be flexibly adjusted and expanded
according to the specific test needs of customers (such as test
flow, head range, additional test functions).
- Real-time monitoring and visual reporting: All test parameters are
displayed in real time, and test reports that meet the
specifications can be automatically generated. Data export and
printing are supported for easy archiving and analysis.
International reference standards
The WPT-11 dual-station pump comprehensive performance test system
strictly follows and supports the following major international
pump test standards to ensure the international compatibility and
compliance of test results: - ISO 9906:2012: "Rotor Dynamic Pumps-Hydraulic Performance
Acceptance Test-Accuracy Levels 1, 2 and 3". This standard
specifies in detail the hydraulic performance acceptance test
methods, test conditions, measuring instrument accuracy
requirements, test result evaluation methods and accuracy level
divisions for various types of rotor dynamic pumps (including
centrifugal pumps, mixed flow pumps, and axial flow pumps). WPT-11
can support tests that meet its specified accuracy levels.
- ANSI/HI 1.6-2000: American National Standard Rotordynamic
(Centrifugal) Pump Tests. This standard is an industry
specification for centrifugal pump performance testing issued by
the American Hydraulic Institute, covering the performance test
procedures and methods of pumps. The design of WPT-11 fully
considers compatibility with this standard.
- GB/T 3216-2005: Rotordynamic Pump Hydraulic Performance Acceptance
Test Level 1 and Level 2. This is a Chinese national standard that
is highly consistent with ISO 9906 and specifies the accuracy level
and test requirements for the rotordynamic pump hydraulic
performance acceptance test.
- IEC 60034-1: Rotating Electric Machines Part 1: Ratings and
Performance. This standard applies to the motor part that drives
the water pump. WPT-11 also considers the electrical parameter test
and efficiency evaluation of the motor part when testing the
overall performance of the water pump, which meets the relevant
requirements.
Technical Parameters Parameter | Measurement Range / Description | Accuracy | Number of Test Stations | 2 (Dual-station parallel testing) | N/A | Flow Measurement Range | 0.5 ~ 5000 m³/h (Customizable) | ±0.5% F.S. | Head Measurement Range | 0 ~ 500 m (Customizable) | ±0.5% F.S. | Power Measurement Range | 0.5 ~ 500 kW (Customizable) | ±0.5% F.S. | Speed Measurement Range | 0 ~ 6000 rpm | ±0.1% F.S. | Torque Measurement Range | 0 ~ 5000 Nm (Customizable) | ±0.5% F.S. | NPSH Measurement | Automatic vacuum/pressure control, NPSH(r) test | ±0.05 m | Pressure Sensor Type | Differential pressure, Absolute pressure, High-precision | ±0.25% F.S. | Temperature Measurement | 0 ~ 100 °C | ±0.1 °C | Data Acquisition Rate | Up to 1000 Hz | High Speed | Control System | Industrial PC + PLC/DCS integrated control | Stable and Reliable | Software Interface | User-friendly GUI, Data logging, Report generation, Curve plotting | Intuitive | Power Supply | Three-phase AC 380V/50Hz (Customizable) | Stable | Noise Level | < 70 dB (excluding tested pump noise) | Low | System Dimensions | Varies by configuration, customizable | Compact and Rational | Wetted Parts Material | Stainless Steel 304/316 (Customizable) | Corrosion-resistant, Durable | Communication Interface | Ethernet, USB | Standard | Data Storage | Large capacity storage, capable of storing vast test data | Secure |
After-sales service We are well aware of the importance of high-quality after-sales
service to customers. To ensure that your WPT-11 dual-station pump
comprehensive performance test system can operate stably and
efficiently for a long time, we provide a full range of
professional services and support: - On-site installation and commissioning: Our team of professional
engineers will be on-site to be responsible for the installation,
calibration and initial operation commissioning of the equipment to
ensure that the system is seamlessly integrated and put into use.
- Operation and maintenance training: Provide targeted operation
training courses to ensure that your technicians can master the
daily operation, data analysis, basic maintenance and
troubleshooting of the system.
- Technical support and remote assistance: Set up a dedicated
technical support team to provide customers with timely responsive
technical consultation and fault diagnosis services through various
means such as telephone, email or remote assistance.
- Regular maintenance and calibration: Provide regular on-site
maintenance and instrument calibration services to ensure that the
system measurement accuracy always meets international standards
and extend the service life of the equipment.
- Spare parts supply: Establish a complete spare parts inventory
system to ensure the timely supply of key components and minimize
downtime caused by spare parts problems.
- Software upgrades and updates: Regularly release system software
updates and upgrade packages to provide new features and optimize
performance to ensure that your system always stays at the
forefront.
- Warranty: Provide comprehensive warranty services, covering
equipment parts and labor, so you have no worries.
|
