Vertical Drip Box Waterproof Testing Machine - Ingress Protection
Test Equipment - IEC60529 IPX12
Standard:IEC60529 degree of protection provided by enclosures (IP Code) of
the IPX1 and IPX2, IEC60884-1, IEC60335-1, IEC60598-1.
Application:It is used for the testing of IPX1 and IPX2.
Ingress Protection Test Equipment
Test sample:The test apparatus with water proof functions, such as electronic
appliances, lamps, electrical cabinets, electrical components,car,
motorcycle, electrical products (such as automotive instrument, all
kinds of switches, micro motors, etc.).
Feature:The rise and fall of the drip box is controlled by the motor. It is
equipped with the rotatable objective table whose rotating speed is
1r/min for IPX1 test; It is also equipped with 15°bevel for
supporting sample for the IPX2 test. This device is with the clean
water filtration unit which can prevent pinhole from jamming, it is
controlled by PLC electrical control system, and touch screen
operation.
Ingress Protection Test Equipment
Parameters:
| Item | Parameter |
| Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This
device is equipped with clean water filtration unit |
| Control and operation | PLC intelligent control, 7 inch color touch screen operation |
| Testing time | 0-999.9min |
| Water tank size | Outline dimension:WDH=750×1400×1750mm, fully enclosed water tank,
SUS304 material |
| Drip test area | 1000×1000mm, customizable |
| Drip height | 200mm, adjustable |
| Dripping rate (Water flow) | 1 mm/min or 3 mm/min switchable, adopt digital controlled rainfall
technology |
| Needle hole | Φ0.4mm |
| Distance between holes | 20mm |
| Supporting sample | 15°bevel |
| Water tank lifting drive | Motor drive, screw guide rail to ensure the stable lifting and
self-locking |
| Installation method | Wall mounted |
Rotary table Ingress Protection Test Equipment | Rotating speed1r/min. Can be paused 150s at four aspects, Load
bearing ≤150㎏electrical equipment, Diameter:800mm, Adjustable
height of the adjustable telescopic tube: 300mm,1200mm-1500mm |
| Site requirements | Dedicated IP waterproof test room,The ground should be flat with
illumination 10A waterproof leakage switch(or socket)used for equipment. With
good function of inflow and drainage. Ground installation. |
| Area covered | WDH =1500mm×1500mm×3300mm, the size can be set according to
customer’s requirement |
