230V 60Hz Ingress Protection Test Equipment 2000x800x600mm

Browse Categories

Guangzhou HongCe Equipment Co., Ltd.

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-18933919125

Contact Person:
Ms.Tessa Huang View Contact Details

230V 60Hz Ingress Protection Test Equipment 2000x800x600mm

Brand Name	HongCe
Model Number	HH0813D
Certification	Calibration certificate(cost additional)
Place of Origin	China
Minimum Order Quantity	1 set
Price	Negotiation
Payment Terms	T/T
Supply Ability	10 sets per month
Delivery Time	45 days
Packaging Details	plywood
Warranty	1 Year
Usage	Water Ingress Protection Test
Power supply	230V, 60Hz
Inner chamber size	2000x800x600mm
Compressed air pressure	1.00±0.01kgf/cm²
Product name	Salt Spray Testing Machine
Relative humidity of testing chamber	More than 85%
Acid value PH	6.5~7.2 3.0~3.2

Detailed Product Description

230V 60Hz Ingress Protection Test Equipment salt spray testing machine 2000x800x600mm

Application:
The salt spray test machine is used for the surface treatment of various materials, including coatings, electroplating, organic and inorganic coatings, anodizing, anti-rust oil and other anti-corrosion treatments to test its corrosion resistance, thus establishing the quality of the product.

Inner chamber introduction:

Spray tower	The built-in glass nozzle is placed inside the spray tube, and the spray is guided through the tower tube and dispersed into the test chamber through the cone disperser.
Spray regulator	Adjust the quantity of spray by increasing or decreasing it. The preheating tank of salt water is at the bottom of the spray tower. Its salt water is injected into to tank from refill bottle. The water level is controlled by float ball automatically. Drain outlet for cleaning is stuck by silicone cork at the bottom of the tank.
Collector	The spray from the spray nozzles will fall into a 80cm2 V-shape container in free fall way and will be led to measure cup by tube.
Rack	The rack is made of plastic-steel. The maximum rack load shall be 2kg for single lading point or 10kg for scattered lading points.
Heating tank	The U-shaped heating tube is equipped with a heating tank for the test chamber, which is used for heating water to keep the temperature in the test chamber stable, and its function is heating and heat preservation.
Metering tube	Collect the spray volume for each test.
Water-sealed tank:	A 5cm wide water tank around the transparent acrylic cover is sealed with water to prevent salt spray from leaking.
Saturated air pail	It is placed inside the control box, and its function is to heat and humidify the air through this pail, so that the air reaches the saturated humidity and sprays.
Test inlet	Automatically replenish the salt solution of the brine preheating tank.
Chamber cover	A roof-like transparent top with 100º angle which cover the machine testing body and unify it.
Adjust press valve	This valve is used to adjust the spray pressure. It can only be adjusted when the spray switch is turned on and the machine is operating normally (test conditions 1Kg / cm²)
Pressure meter	It shows the pressure of the air from the saturated-air pail to the nozzle (testing pressure: 1kg/cm2)
Exhaust pipe	The diameter of the exhaust pipe is 48mm. The spray in the chamber is discharged through this hole. When testing, it is best to connect a hose to lead the spray to the outside. Do not block or have water accumulation.
Chamber drain valve	The red ball valve is equipped with a 4-point PVC water pipe. This valve is opened when the chamber water is dirty and the chamber water needs to be replaced.
Test chamber temperature controller	Control the temperature in the chamber according to standards, the temperature of the chamber is controlled at 35 ℃.
Saturated-air pail temperature controller	Control the temperature in the saturated-air pail, another safety protection device, the temperature safety set value is 5 ° C higher than the actual temperature. (Located in the control box)
Timer	Set testing time from 0.1s to 9999hr and stop the machine when the time expires.
Salt water spray test	35℃ for test chamber controller and 47℃(40℃-50℃)for saturated-air pail controller.
Corrosion-resistant test	50℃ for test chamber controller and 65℃(60℃-70℃)for saturated-air pail controller.
Power switch	Illuminated rocker switch. Control the mains of the whole machine.
Operation switch	Illuminated rocker switch. Control the water-heater tank and the heater system of saturated-air pail.
Timer switch	Illuminated rocker switch. Control the power of timer.
Spray switch	Illuminated rocker switch. Control the spray system.
Defogger switch	Illuminated rocker switch type. Control the defogger system and get rid of the salt spray inside the box.
Chamber water shortage lamp	The light will be turned on and the operation will be stopped when the water level in the chamber is lower than the limit.
Pressure water shortage lamp	The light will be turned on and the operation will be stopped when the water level in the saturated-air pail is lower than the limit.
Lack brine lamp	The light will be turned on and the operation will be stopped when the water level of preheating tank of salt water is lower than the limit.

Technical Parameters:

Model	HH0813D
Inner chamber size (mm)	2000x800x600mm(WDH)
Outer chamber size (mm)	2300x1100x1400mm(WDH)
Test chamber temperature	Salt water test method (NSS ACSS AASS)35℃±1℃/ corrosion resistance test method(CASS)50℃±1℃
Pressure barrel temperature	Salt water test method(NSS ACSS AASS)47℃±1℃/ corrosion resistance test method(CASS)63℃±1℃
Salt concentration	The concentration of sodium chloride 5% or the 5% concentration of sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O)
Compressed air pressure	1.00±0.01kgf/cm²
Spray amount	1.0~2.0ml/80cm²/h (collecting at least for 16 hours, take the average)
Relative humidity of testing chamber	More than 85%
Acid value PH	6.5~7.2 3.0~3.2
Spray mode	Programmable spray (including continuous spray and intermittent spray)
Meet the standards	JIS, ASTM, CNS
Power supply	230V, 60Hz

A:	B:
1.Test chamber	8.Compressed air inlet
2. Manual water filling place for pressure pail	9.Exhaust
3.Metering tube	10.Power supply 230V
4.Brine inlet	11.Chamber drainage valve
5.Control plane	12.Cover support frame
6. Adjust press valve
7.Control box door

Product front view A: Product back view B:

Product Tags: 230V Salt Spray Testing Machine 60Hz Salt Spray Tester

Related Products

HH0803 Ingress Protection Test Equipment 121-Hole Precision Spray 10L/min Water Flow 150Kpa Pressure IPX3 and IPX4 Compliance Tester

IEC 60529 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment 500L Water Tank

IEC 60529 IPX5-6 Spray Test Equipment With Φ6.3mm And 12.5mm Nozzle 500L Tank

IEC 60592 IPX1 To IPX8 Waterproof Ingress Protection Test Equipment

IEC 60529 Tiltable Rotating Stage Work With Waterproof Test Equipment Made Of Aluminum Alloy

15 Degrees Tiltable Rotating Stage Ingress Protection Test Equipment 1r/Min Ø600mm For IPX1-IPX6

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	Guangzhou HongCe Equipment Co., Ltd.
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!