YS-G9 Fully Automatic Solder Paste Printer Machine Performance Specifications | Parameter | Specification |
|---|
| Repeat Position Accuracy | ±10μm @ 6σ, CPK ≥ 2.0 | | Print Accuracy | ±18μm @ 6σ, CPK ≥ 2.0 | | NCP Cycle Time (excluding cleaning/printing) | 7 seconds | | HCP Cycle Time (including cleaning/printing) | 18 seconds per piece | | Process Cycle Time | 4 minutes | | Transfer Line Cycle Time | 2 minutes |
Substrate Processing Parameters | Parameter | Specification |
|---|
| Maximum Board Size | 450 × 340 mm | | Minimum Board Size | 50 × 50 mm | | Board Thickness | 0.4 - 6 mm | | Camera Mechanical Range | 450 × 340 mm | | Maximum Board Weight | 3 kg | | Board Edge Clearance | 2.5 mm | | Board Height | 15 mm beyond trait items pin | | Transport Speed | 900 ± 40 mm/s | | Maximum Transport Speed | 1500 mm/s (segmented control) | | Transport Direction | One section transport guide rail/One stage |
Printing Parameters | Parameter | Specification |
|---|
| Print Speed | 10 - 200 mm/sec | | Print Pressure | 0.5 - 10 kg | | Print Mode | One/Twice | | Squeegee Type | Rubber/Squeegee Blade (angle 45/55/60) | | Snap-off | 0 - 20 mm | | Snap Speed | 0 - 20 mm/sec | | Template Frame Size | 470 × 370 mm - 737 × 737 mm (Thickness: 20-40 mm) | | Steel Mesh Positioning Mode | Automatic Y-direction positioning |
Cleaning Parameters | Parameter | Specification |
|---|
| Cleaning System | Dry, Wet, Vacuum three modes | | High Speed Cleaning | Integrated & weave cleaning | | Cleaning System Type | Side spray type | | Cleaning Stroke | Automatic generation | | Cleaning Position | Pre-cleaning | | Cleaning Speed | 10 - 200 mm/sec | | Cleaning Fluid Consumption | Auto & manually adjustable | | Cleaning Paper Consumption | Auto & manually adjustable |
Machine Specifications | Parameter | Specification |
|---|
| Power Source | AC: 220V ±10%, 50/60Hz, 2.2KW | | Air Pressure | 4 - 6 kgf/cm² | | Air Consumption | Approximately 5 L/min | | Operating Temperature | -20℃ to +45℃ | | Working Environment Humidity | 30% - 60% | | Machine Dimensions (without tower light) | 1530(H) × 1172(L) × 1385(W) mm | | Machine Weight | Approximately 1000 kg | | Equipment Load Bearing Requirements | 650 kg/m² |
Equipment Details - Equipment Model: YS-G9
- Dimensions: 1172(L) × 1385(W) × 1530(H) mm
- Main Power Supply: AC: 220V ±10%, 50/60Hz, 3KW stable power supply with rated
current, British system plug
- Main Gas Supply: Stable industrial gas source with pressure of 4.0-6 kgf/cm², pipe
diameter 6mm/8mm/10mm/12mm with universal front joint
- Machine Weight: Approximately 1000 kg
Equipment Usage Environment - Workshop Temperature: -20℃ to +45℃
- Workshop Humidity: 30% - 60%
- Static Electricity Protection: ESD grounding and static electricity protection required
- Floor Load-bearing Capacity: Must be ≥ 650 kg/m² (pay attention to floor sinking if not on flat
surface)
|
