High Efficiency High Precision Scribing Pcb Cleaning Machine

YSL 3600 High Efficiency High Precision Scribing Machine

Equipment use environment requirements and technical parameters

YSL3600Precision scribing machine single axis efficient cutting mode; the maximum processing

workpiece size is 150 * 150mm, suitable for small packaging substrate materials, soft materials

cutting, manual loading and unloading, automatic transmission and positioning, automatic alignment cutting.

1.The scribing machine shall be installed without obvious vibration. Clean the room

without corrosive gas and strong magnetic field. Working temperature is between 20 and 25

℃ and remains constant; relative humidity is <60%, no condensation.

2.The compressed air used by the scribing machine should be clean without oil and water,

and the compressed air must be filtered through the cold dryer.

3.The cutting cooling water quality of the cutting machine shall be clean without impurit

ies, and the water temperature shall be within 16-20℃, and the water temperature fluctua

tion is less than or equal to ± 1℃ ; the excessive water temperature may cause cutting e

dge breaking, membrane wear, blade and cutting ; the water temperature of the cutting mach

ine shall be within 9-16℃, and the water temperature fluctuation is less than or equal t

o ± 2℃ ; the excessive water temperature may cause tin melting, reverse cutting and brok

en cutting. (The difference from room temperature is within ± 3℃ to avoid excessive cond

ensate)

4.The water quality of the spindle cooling water used in the scribing machine should be c

lean and free of impurities, the water temperature should be within 12-20℃, and the wate

r temperature fluctuation is less than or equal to ± 1℃. If the water temperature excee

ds the standard, it may affect the spindle cooling, affect the accuracy and stability of

the spindle, resulting in cutting deviation, poor cutting quality and other conditions. (W

ith room temperature and cutting temperature within ± 3℃)

5.Gas source oil content is less than 0.5mg / m³.