LKAV3624 8 Channel Video Transmission System Audio Embedding 2km NLOS CAN Control

LKAV 3624&3203 2km UGV Video Data Link CAN Control Bi-directional Audio

Introduction

The LKAV-3624 & 3203 is a powerful 8-channel video transmission system specially designed for unmanned Excavator, Backhoe Loader, Wheel Loader and UGV applications. It features 8-channel video input (1080p AHD), CAN for control, audio embedding, 2x2W RF power output and transmitting range up to 2km NLOS (5-10km LOS).

Features

■ 580±20MHz frequency adjustable

■ Data rate up to 82Mbps

■ 2x2W RF power output

■ Range up to 2km NLOS (5-10km LOS)

■ Built-in DVR supports App control and mode switching

■ Supports two-way audio

■ Supports CAN control

■ Supports DC 10-30V power input

■ With HDMI output on RX

■ Supports AES encryption

■ Supports GPS

■ Rugged aviation aluminum alloy housing

TX Specification

RX Specification

TX Front Panel

① Microphone Interface

② Speaker Interface

③ CAN Interface

④ Signal Indicator – normally red/green quick flashing

⑤ Power Push Button – Push to turn on/off.

⑥ LAN1 Interface – RJ45.

TX Rear Panel

① MESH Antenna Interface – N F.

② CH1 Video Input – 4 pin GX12, with DC 12V power output.

③ CH2 Video Input – 4 pinGX12, with DC 12V power output.

④ CH3 Video Input – 4 pinGX12, with DC 12V power output.

⑤ CH4 Video Input – 4 pinGX12, with DC 12V power output.

⑥ CH5 Video Input – 4 pinGX12, with DC 12V power output.

⑦ CH6 Video Input – 4 pinGX12, with DC 12V power output.

⑧ CH7 Video Input – 4 pinGX12, with DC 12V power output.

⑨ CH8 Video Input – 4 pinGX12, with DC 12V power output.

⑩ GPS Antenna Interface – SMA F.

⑪ Power Input Interface – 3 pin aviation connector, DC 10-30V.

⑫ MESH Antenna Interface – N F.

⑬ LAN2 Port – RJ45.

⑭ LAN3 Port – RJ45.

RX Front Panel

① Power Push Button – Push to turn on/off.

② Signal Indicator

③ Mode Button – Push to switch between Full Screen, Four-Split Screen, Eight-Split Screen and Nine-Split Screen modes.

④ Switch Button – Push to select CAM01, CAM02, CAM03…CAM08.

⑤ CAN Interface – 2 Pin aviation connector.

⑥ Intercom Interface – for K head microphone.

RX Rear Panel

① MESH Antenna Interface – N F.

② GPS Antenna Interface – SMA F.

③ HDMI Output Interface.

④ LAN Port – RJ45.

⑤ Power Input Port – 3 pin aviation connector, DC 10-30V.