1 - 10 of 703
resistance manganin strip
Selling leads
|
...Manganin Strip/Tape/Roll 0.5mm*85mm Product Description Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin ...
2024-12-09 12:02:13
|
|
..., and 2% nickel. Manganin foil and wire is used in the manufacture of resistors, particularly ammeter shunts, because of its virtually zero ...
2024-12-09 12:25:37
|
|
Manganin Shunts Material Copper Strip 50mm Widhth With Manganin Strip 3.0mm thickness And 95 Width Manganin Shunts Material Copper Strip 50mm Widhth ...
2024-12-09 12:37:22
|
|
... and wire is used in the manufacture of resistors, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance ...
2024-12-09 12:38:11
|
|
... in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards. ...
2024-12-09 13:34:49
|
|
... Manganin is an alloy of typically 86% copper,12% manganese,and 2%nickel. A resistance alloy with moderate resistivity and low temperature ...
2024-12-09 13:27:40
|
|
...resistant manganin resistance alloy wire CuNi19 Characteristics: 1)Manufactured according to international quality. System (ISO9001) 2)Stable ...
2025-03-11 19:31:30
|
|
... Strip Bar includes: Cr25Ni20,Cr20Ni35,Cr15Ni60,Cr20Ni80. 3.Copper Nickel wire Strip includes: CuNi1,CuNi2,CuNi5,CuNi8,CuNi10,CuNi14,CuNi19,CuNi23...
2024-12-09 12:31:54
|
|
... mm2/m Density 8.G/cm3 Temp Coefficient of Resistance at 20 ºC -80~+80α×10-6/ºC Melting Point 1450ºC Tensile Strength(Hard) 635 MPa(min) Tensile ...
2024-12-09 13:46:53
|
|
...uld be carefully stabilised and the application temperature should not exceed +60 °C. Exceeding the maximum working temperature in air may result ...
2024-12-09 12:47:21
|