791 - 800 of 812
455 mpa electric resistance wire
Selling leads|
...Wire (NI200 NI201) UNS NO2201 0.025mm Nickel Grade Ni+Co Cu Si Mn C Cr S Fe Mg ≥ ≤ Ni201 Bal. .25 .3 .35 .02 .2 .01 .3 - Ni200 Bal. .25 .3 .35 .15 ...
2026-06-01 00:03:46
|
CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300) CuNi30(C71500) Sheet / Plate / Strip For Breaker
|
CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), CuNi30(C71500) sheet/plate/strip Material: CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), ...
2025-04-29 07:45:01
|
|
.... When used in a long time, the same type and the permanent elongation is very small, with excellent comprehensive properties, is to produce high...
2024-12-09 13:39:47
|
|
...the ASTM B162 standard. It’s commercially pure (99.6% and 99.9%) with good mechanical properties, and is resistant to a range of corrosive media. ...
2024-12-09 10:54:33
|
|
C18150 C18150 is a copper alloy commonly known as copper-chromium (CuCr). Here’s an overview of its properties, composition, and applications ...
2024-12-10 00:12:25
|
|
Nichrome Tape(Nickel Chromium Resistance Tape) Usage: Rocketry or pyrotechic igniters, electric matches,Foam cutting, heating, release mechanisms, ...
2025-08-30 04:43:30
|
|
...electric heating materiales depends on inherent resistance to the current flow to produce heat. Copper wire doesn’t produce sufficiently heat when ...
2024-12-09 12:37:22
|
|
...bar,pipe and wire Specifications The biggest characteristic of copper is highly conductive, thermal conductivity, and good corrosion resistance...
2024-12-09 12:27:41
|
|
...±0.03ohm mm2/m Density 8.G/cm3 Temp Coefficient of Resistance at 20 ºC -80~+80α×10-6/ºC Melting Point 1450ºC Tensile Strength(Hard) 635 MPa(min) ...
2024-12-09 13:46:53
|
|
...WIRE has high resistivity,high temperature strength,excellent mechanical property and anti-corrosion property.The alloy is used to make electrical ...
2026-03-26 14:00:24
|
