Nickel Copper Wire (CuNi15)
Principally destined for the manufacturing of low temperatures
electric resistances so as heating cables, shunts, resistances for
automobile, they have a maximum operating temperature of 752F.
They do not therefore intervene in the field of resistances for
industrial furnaces. Those are alloys of chemical composition
copper + nickel with addition of manganese with a low resistivity
(from 231.5 to 23.6 Ohm. Mm2/ft).
The most known, CuNi 44 (also called Constantan) presents the
advantage of a very low temperature coefficient.
China Grade from Tankii alloy: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14,
CuNi19, CuNi23, CuNi30, CuNi34, CuNi44
Packing: Spool, carton, pallet: Coil, waterproof paper
Tankii Alloy is the best alloy wire and alloy strip producer in
China Their advantages are the following: Very good resistance to corrosion Very good malleability Very good solderability
| Form | Specification | Supply Form | Others | | Sheet | Thickness:0.40-4.75mm,General Width:1000,1219,1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B,2E | | Plate | Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under
10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D | | Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B,2E | | Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle,Square) | Solution annealing,descaling | | Forged barΦ26-245mm,Length≤4000mm | | Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000
mm | Base on your requirement | Use for PHE | | Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | Use for PHE | | Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy | | Forged piece | roundness and square alloy | Base on your requirement | Steel, Alloy | | Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy | | Welding Material | Coil wire Φ0.90mm/1.2mm/1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria,
Italy, France. | | Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm | | Welding rodΦ2.4mm/3.2mm/4.0mm | | Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy | | Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
|
