31 - 40 of 219
c10200 copper fin tube
Selling leads
|
....2 mm Fin height H 6~30 mm ±0.75 mm Tube thickness δ1 2~16 mm ±0.15 mm Fin thickness δ2 0.8~2.5 mm ±0.1 mm Unfinned tube ends length L1 customized ...
2026-07-07 00:19:16
|
|
Finned Tube Stainless Steel Welded Pipe — G-Type Fin Tube for Industrial Radiators Material This product is a G-Type (embedded) finned tube composed ...
2026-07-07 00:19:16
|
|
...Fin Tube (Helically Tension Wound, Cold-Formed Finned Tube) for Air Coolers Material A Crimped Fin Tube (also called a Spiral Tension Wound / Cold...
2026-07-07 00:19:16
|
|
..., KL Fin, G Type Tests Hydraulic test, pneumatic test, tensile test, heat dissipation performance test, spectral analysis L Fin: L- shaped strip ...
2026-07-07 00:19:16
|
|
...Finned Tube (Alloy Steel Spiral-Wound) for Heat Exchangers Material This product is a finned heat-exchanger tube where an alloy steel base (core ...
2026-07-07 00:19:16
|
|
...Finned Tubes – High-Frequency Welded (HFW) Finned Tubes for Industrial Radiators Material The H-type finned tube described here is a high...
2026-07-07 00:19:16
|
|
... in which a thin aluminum strip is helically wound around a base tube under controlled tension. An “L”-shaped foot is first formed on one edge of ...
2026-07-07 00:19:16
|
|
...Fin Tubes Stainless Steel Integral Low Finned Tube for Industrial Heat Exchangers Material This product is an integral low finned tube manufactured ...
2026-07-07 00:19:16
|
|
...length of high-frequency welded spiral finned tube can reach more than 20 meters, and there is no connection point, which makes the installation ...
2026-07-07 00:19:16
|
|
...Finned Tube for Heat Exchangers Material Introduction The product is a tension-wound finned tube of the “L-Foot” style, meaning that the fin strip ...
2026-07-07 00:19:16
|