Temperature And Humidity Test Chamber With Environmental Test Systems

Temperature And Humidity Test Chamber With Environmental Test Systems

INTRODUCTION

The environmental test chamber have temperature change rates from 1 to 3°C per minute in average and controlled humidity from 10% to 95%. There are 6 sizes with interior volumes of 100 to 1000 Liters or we also provide tailor-made chambers of size. On the advance model for Cycling Chambers have temperature change rates from 3 to 15 °C, controlled humidity from 10 to 95%.

GENERL SPECIFICATIONS

Packaging Dimensions: (WxDxH) 1800*1380*2100mm

Power supply source: three-phase, 380V±10%, 50Hz (can be appointed)

Gross Weight: 600kg

HS Code: 8479899990

STANDARD FEATURES

APPLICATIONS

1. To simulate test environment with different temperature and humidity

2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…

3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

4. Uncover test unit weakness in a short-term test with accelerated time effect

SYSTEM AND PERFORMANCE OPTIONS

Low and Ultra-Low Humidity Extends the humidity control range. (Normal Humidity Range Diagramed)

Water-cooling system.

Dry Air Purge keeps moisture in the chamber extremely low by purging with -40 °C. Compressed air supply required

Additional shelves, 50 Kg loading

Cable ports with flexible silicone plug, 50 , 100, 150mm or customer specific diameters

Get a performance evaluation to help provide the suitable chambers to you.

For better assurance of performance for your temperature and humidity cycling application, Haida can provide a guaranteed performance calculation based on your submitted requirements.

Please use these questions as below as a guide to define your test plan. You can then give this information to our lab consultant or email to us, for review by our lab consultant. A recommended model with appropriate refrigeration size will provide to you.

CHAMBER DESIGN FEATURES

1. High performance and quiet operation (68 dBA)

2. Space-saving designed for flush installation to wall

3. Full thermal break around doorframe

4. One 50mm diameter cable port o left, with flexible silicone plug

5. Accurate wet/dry-bulb humidity measurement system for easy maintain

PROGRAMMABLE CONTROLLER

1. PLC controller for test chamber

2. Step types include: ramp, soak, jump, auto-start, and end

3. RS-232 interface to connect computer for output

HUMIDITY RANGE

                                             20 to 98%RH per chat (no live load)

ABOUT HAIDA
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.