Rapid-rate Thermal Shock Cycle Test Chamber With Digital Display
Three Zone Thermal Shock Test Chamber
Product Description:
Thermal Shock Cycle Test Chamber is used to test the bearing extent of the material structures and
composite material in an instant and continuous high temperature
and extremely low temperature environment, which is in the shortest
time to test its thermal expansion and contraction caused by
chemical change or physical harm.
Main Parameters:
| Test method | Pneumatic operated door switch 3 chambers |
| Inner dimension (W*D*H) | 500*450*450mm |
| External dimension (W*D*H) | 1380*1370*1980mm |
| Temperature range | -40 ~ +80℃ |
| High temperature chamber pre-heating range | 60 ~ 100℃ |
| Heating speed | +60→+100℃ about 10 minutes |
| Low temperature chamber pre-cooling range | -65 ~ 0 |
| Cooling speed | Ambient →-65℃ about 65 minutes |
| Temperature deviation | ±3℃ |
| Thermal recovery time | Within 5 minutes |
| External material | Antirust processing cold-rolled steel sheet |
| Internal material | SUS#304 stainless steel |
| Thermal insulation material | Polyurethane foam and fiberglass |
| Coolant | R404A / R23 |
| Cooling method | Air cooling |
| Pressure | 0.2 - 0.5Mpa |
| Power supply | Three phase, 380V, 50Hz |
Features:
1. Perfect appearance and easy to operate.
2. Japan LCD English microcomputer temperature controller, with
high memory capacity, can save 100 programs, max 9999 cycles, each
cycle max time 999hrs.
3. Three chamber structures, high temperature chamber, low
temperature chamber and test chamber, control automatically, stay
and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage,
over temperature of work chamber; compressor over pressure, over
load, short water…
5. Control interface will display alarm reason and provide check
methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within 5 minutes, which
complies with MTL, IEC, JIS, GJB and other international standards.
7. With RS-232C communication port for connecting PC to control,
record and save test report.
High Temperature Chamber:
Heater: NI-CR alloy electric heater
Draught fan: Share centrifugal fan when high temperature and do
environmental temperature, preheating with axial flow fan.
Low Temperature Chamber:
Cooler: Fin cooler, regenerator
Draught fan: centrifugal fan
